User Manual

- 7 -
THE DEFAULT SETTINGS ARE;
- When User RFID Granted:
Output RELAY#1 activates for 3 seconds
Green LED activates for 3 seconds
- Exit Input entered:
Output RELAY#1 activates for 3 seconds
Green LED activates for 3 seconds
- When User RFID denied:(within Try-out count, default 5 times)
Output RELAY#2 activates for 1 second
- When Try-out error occures:(from 6th Try-out)
Output RELAY2 activates for 5 second
- Numbers of Try-out counter set to 5 times
- Keypad input limit time set for 10 seconds
- Silent operation mode off
7.2 NORMAL OPERATION
RED LED always lit and YELLOW LED is blinking every seconds.
A) OPERATING OUTPUTS
Present User RFID ...If User RFID is granted, RELAY#1 activates.(SAFE MODE)
...If User RFID is denied, RELAY#2 activates.
B) EXIT INPUT ENTERED ...RELAY#1 activates.(SAFE MODE)
C) “77”+(ENT) …Enter to SECURE MODE