User's Manual

󰼿 󰼿 󰼿 󰼿 󰼿 󰼿 󰼿 󰼿
S TAR RF L200 PROXIMITY ACCESS CONTROLLER
󰼿
4. Installation
4
-1
. Mullion/Wall Mount
Drill two 3mm holes 2.72"(69mm) apart in vertical and drill one 1/2" hole for
the controller cable 1.36"(34.5mm) apart from the top hole.
4-2.
Put controller cable into the center hole and install the controller module by using two
3-20 screws.
4-3. Put bezel into the controller module then push bezel until you hear the locking sound.
RF L 200
5. Wire Color Table of STAR RFL200
POWER
Power(DC 12V) +12V Red wire
Power(DC 12V) 0V(GND) Black wire
OUTPUT
Lock control DOORLOCK White wire
INPUT
Lock Type LOCKTYPE Yellow wire
Exit control EXIT Green wire
STAR RFL200-20011101󰼿
4