User's Manual

󰼿 󰼿 󰼿 󰼿 󰼿 󰼿 󰼿 󰼿
S TAR RF L200 PROXIMITY ACCESS CONTROLLER󰼿
6. Wire Connection of STAR RFL200
* If you use “Power Fail Safe” Lock
then connect Lock Type(Yellow wire)
t to Power GND(Black wire).
.
RF L20 0
7. Operation
7-1
. Apply power, Red LED will light. No sound.
7-2
. Present proximity keytag to the RFL-100 until you hear beep sound, Green LED will light
and door opens for 5 seconds.
7-3. Press EXIT button for exit, door opens for 5 seconds.
7-4
. Register/Delete User’s Keytags:
Present Master Card. Green LED will light with 2 beeps sound.
Present keytags to be registered or deleted. LED will flash to Red once,
3 beep sound let you know the keytag is registered to the memory and
4 beep sound let you know the keytag is deleted from the memory.
Present Master Card again to finish Register/Delete Operation. Red LED will light with
One long beep sound.
7-5
. Erase all keytags and re-Register User’s Keytags:
If you lost the keytag(s) and want to delete lost keytag(s), you have to erase all memory
and re-Register User’s keytags.
Present Master Card. Green LED will light with 2 beeps sound.
Present Master Card again. Red LED will light with one beep sound. (All memory erased)
Present Master Card. Green LED will light with 2 beeps sound.
Present keytags to be registered. LED will flash to Red once with 3 beeps sound.
Present Master Card again to finish re-Register Operation. Red LED will light with
One long beep sound.
STAR RFL200-20011101󰼿
5