Owner's Manual

ManualsBrandsiDatalink ManualsCar AmplifiersConnects a Maestro AR amplifier replacement module to select 2011-up Ford vehicles

Table Of Contents

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro AR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

Summary of content (75 pages)

PAGE 1
SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. 2 Print only the pages for your vehicle using the advanced options in the Print menu. 3 Install your Maestro AR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. NOTICE: Automotive Data Solutions Inc.
PAGE 2
INSTALL GUIDE Ford Edge 2011-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 3
Ford Edge 2011-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 4
Ford Edge 2011-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 5
Ford Edge 2011-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 6
Ford Edge 2011-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 7
Ford Edge 2011-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-) G
PAGE 8
INSTALL GUIDE Ford Escape 2013-2016 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 9
Ford Escape 2013-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 10
Ford Escape 2013-2016 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 11
Ford Escape 2013-2016 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 12
Ford Escape 2013-2016 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 13
Ford Escape 2013-2016 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-)
PAGE 14
INSTALL GUIDE Ford Expedition 2015-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 15
Ford Expedition 2015-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 16
Ford Expedition 2015-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 17
Ford Expedition 2015-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 18
Ford Expedition 2015-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 19
Ford Expedition 2015-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter
PAGE 20
INSTALL GUIDE Ford Explorer 2011-2015 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 21
Ford Explorer 2011-2015 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 22
Ford Explorer 2011-2015 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 23
Ford Explorer 2011-2015 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 24
Ford Explorer 2011-2015 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 25
Ford Explorer 2011-2015 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-
PAGE 26
INSTALL GUIDE Ford Explorer 2016-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 27
Ford Explorer 2016-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 28
Ford Explorer 2016-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 29
Ford Explorer 2016-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 30
Ford Explorer 2016-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 31
Ford Explorer 2016-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-
PAGE 32
INSTALL GUIDE Ford F150 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 33
Ford F150 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 34
Ford F150 2013-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 35
Ford F150 2013-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 36
Ford F150 2013-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 37
Ford F150 2013-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-) G
PAGE 38
INSTALL GUIDE Ford F250 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 39
Ford F250 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 40
Ford F250 2013-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 41
Ford F250 2013-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 42
Ford F250 2013-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 43
Ford F250 2013-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-) G
PAGE 44
INSTALL GUIDE Ford F350 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 45
Ford F350 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 46
Ford F350 2013-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 47
Ford F350 2013-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 48
Ford F350 2013-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 49
Ford F350 2013-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-) G
PAGE 50
INSTALL GUIDE Ford Flex 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 51
Ford Flex 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 52
Ford Flex 2013-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 53
Ford Flex 2013-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 54
Ford Flex 2013-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 55
Ford Flex 2013-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-) G
PAGE 56
INSTALL GUIDE Ford Focus 2012-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 57
Ford Focus 2012-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 58
Ford Focus 2012-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 59
Ford Focus 2012-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 60
Ford Focus 2012-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 61
Ford Focus 2012-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-)
PAGE 62
INSTALL GUIDE Ford Fusion 2013-2016 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 63
Ford Fusion 2013-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 64
Ford Fusion 2013-2016 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 65
Ford Fusion 2013-2016 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 66
Ford Fusion 2013-2016 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 67
Ford Fusion 2013-2016 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-)
PAGE 68
INSTALL GUIDE Ford Taurus 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE iDatalink Maestro AR Amplifier Replacement Interface iDatalink Maestro AR-FO2 Installation Harness Extension harness provided with Kenwood amplifier ADS-AR-FOR02 NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician.
PAGE 69
Ford Taurus 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro AR Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle and that you carefully review the install guide.
PAGE 70
Ford Taurus 2013-2017 SETTINGS AND FEATURES CHIME ADJUSTMENT Chime volume adjustment will only work if the chimes are played by the vehicle speakers (some Ford vehicles generate the chime in the cluster or with dedicated speakers in the back of the vehicle). CHIME ADJUSTMENT PROCEDURE: • Set the audio source to OFF. • Activate door or parking assist chime. • Adjust the chime volume using the volume knob.
PAGE 71
Ford Taurus 2013-2017 INSTALLATION INSTRUCTIONS STEP 1 • For technical assistance call 1-866-427-2999 or e-mail “support@idatalink.com”. Visit us at “maestro.idatalink. com/support” and “www.12voltdata.com/forum/” • Remove the factory amplifier (refer to wire chart for amplifier location). • Configure the 2 pin connectors on the AR-FO2 T-harness as shown on the wiring diagram. STEP 2 • Connect the factory amplifier harnesses to the AR-FO2 T-harness.
PAGE 72
Ford Taurus 2013-2017 WIRING DIAGRAM STEP 3 WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK WHITE WHITE/BLACK GRAY GRAY/BLACK RED RED/BLACK RED RED/BLACK KENWOOD AMPLIFIER BLACK BLACK/WHITE BLACK BLACK/WHITE STEP 2 FACTORY AMPLIFIER HARNESSES LF SPEAKER RF SPEAKER LR SPEAKER WIRES FROM VEHICLE RR SPEAKER LF TWEETER RF TWEETER CENTER CH REAR CNTR CH SUB 1 SUB 2 18 PIN CONNECTOR AMP TURN ON AR-FO2 T-HARNESS N.C.
PAGE 73
Ford Taurus 2013-2017 VEHICLE WIRE REFERENCE CHART T-Harness Wires Wire Tag LF SPEAKER LF TWEETER RF SPEAKER RF TWEETER LR SPEAKER RR SPEAKER REAR CNTR CH CENTER CH SUB 1 SUB 2 Vehicle Wires Wire Color Speaker Wire Description White Left Front Speaker (+) White/Black Left Front Speaker (-) White Left Front Tweeter (+) White/Black Left Front Tweeter (-) Gray Right Front Speaker (+) Gray/Black Right Front Speaker (-) Gray Right Front Tweeter (+) Gray/Black Right Front Tweeter (-)
PAGE 74
PAGE 75
HRN-AR-F02 www.idatalinkmaestro.