Owner's Manual

ManualsBrandsiDatalink ManualsAudio accessories & installationInterface Harness

Table Of Contents

Install Guide

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁ ed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

Summary of content (61 pages)

PAGE 1
SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. 2 Print only the pages for your vehicle using the advanced options in the Print menu. 3 Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. NOTICE: Automotive Data Solutions Inc.
PAGE 2
INSTALL GUIDE Chrysler 300 Base 2005-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 3
Chrysler 300 Base 2005-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 4
Chrysler 300 Base 2005-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 5
Chrysler 300 Base 2005-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 6
Chrysler 300 Base 2005-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A P
PAGE 7
INSTALL GUIDE Chrysler Aspen Base 2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 8
Chrysler Aspen Base 2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 9
Chrysler Aspen Base 2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 10
Chrysler Aspen Base 2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 11
Chrysler Aspen Base 2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 12
INSTALL GUIDE Chrysler PT Cruiser Base 2006-2010 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 13
Chrysler PT Cruiser Base 2006-2010 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 14
Chrysler PT Cruiser Base 2006-2010 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 15
Chrysler PT Cruiser Base 2006-2010 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 16
Chrysler PT Cruiser Base 2006-2010 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 17
INSTALL GUIDE Dodge Caliber Base 2007-2008 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 18
Dodge Caliber Base 2007-2008 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 19
Dodge Caliber Base 2007-2008 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 20
Dodge Caliber Base 2007-2008 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 21
Dodge Caliber Base 2007-2008 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 22
INSTALL GUIDE Dodge Charger Base 2006-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 23
Dodge Charger Base 2006-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 24
Dodge Charger Base 2006-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 25
Dodge Charger Base 2006-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 26
Dodge Charger Base 2006-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 27
INSTALL GUIDE Dodge Dakota Base 2005-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 28
Dodge Dakota Base 2005-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 29
Dodge Dakota Base 2005-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 30
Dodge Dakota Base 2005-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 31
Dodge Dakota Base 2005-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A P
PAGE 32
INSTALL GUIDE Dodge Durango Base 2004-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 33
Dodge Durango Base 2004-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 34
Dodge Durango Base 2004-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 35
Dodge Durango Base 2004-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 36
Dodge Durango Base 2004-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 37
INSTALL GUIDE Dodge Magnum Base 2005-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 38
Dodge Magnum Base 2005-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 39
Dodge Magnum Base 2005-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 40
Dodge Magnum Base 2005-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 41
Dodge Magnum Base 2005-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A P
PAGE 42
INSTALL GUIDE Dodge Ram Base 2006-2008 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 43
Dodge Ram Base 2006-2008 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 44
Dodge Ram Base 2006-2008 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 45
Dodge Ram Base 2006-2008 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 46
Dodge Ram Base 2006-2008 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 47
INSTALL GUIDE Jeep Commander Base 2006-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 48
Jeep Commander Base 2006-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 49
Jeep Commander Base 2006-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 50
Jeep Commander Base 2006-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 51
Jeep Commander Base 2006-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 52
INSTALL GUIDE Jeep Grand Cherokee Base 2005-2007 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 53
Jeep Grand Cherokee Base 2005-2007 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 54
Jeep Grand Cherokee Base 2005-2007 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 55
Jeep Grand Cherokee Base 2005-2007 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 56
Jeep Grand Cherokee Base 2005-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 57
INSTALL GUIDE Jeep Patriot Base 2007-2008 retains steering wheel controls, Uconnect, Uconnect Bluetooth, and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro CH2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-CHR02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 58
Jeep Patriot Base 2007-2008 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 59
Jeep Patriot Base 2007-2008 INSTALLATION INSTrUCTIONS STEP 5 STEP 1 • Plug the aftermarket radio harnesses into the aftermarket radio. • Remove the factory radio. • Access the main 22 pin factory radio connector (2.1) and determine if you have a factory ampliﬁer. • Plug the Data cable to the data port of the aftermarket radio. If you have wires in PIN 7, 8, 9 and 10, you don’t have a factory amplifier. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
PAGE 60
Jeep Patriot Base 2007-2008 WIRING DIAGRAM STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 61
Jeep Patriot Base 2007-2008 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A P