Owner's Manual

ManualsBrandsiDatalink ManualsAudio accessories & installationInterface Harness

Table Of Contents

Summary of content (369 pages)

PAGE 1
PAGE 2
HRN-RR-GM2 www.idatalinkmaestro.com Does it work with my car? Fonctionne-t-il avec mon auto? z.
PAGE 3
SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. 2 Print only the pages for your vehicle using the advanced options in the Print menu. 3 Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. NOTICE: Automotive Data Solutions Inc.
PAGE 4
INSTALL GUIDE Buick Enclave 2008-2017 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 5
Buick Enclave 2008-2017 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 6
Buick Enclave 2008-2017 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 7
Buick Enclave 2008-2017 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 8
Buick Enclave 2008-2017 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 9
Buick Enclave 2008-2017 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 10
Buick Enclave 2008-2017 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 11
INSTALL GUIDE Buick Lucerne 2006-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 12
Buick Lucerne 2006-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 13
Buick Lucerne 2006-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 14
Buick Lucerne 2006-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 15
Buick Lucerne 2006-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 16
Buick Lucerne 2006-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 17
Buick Lucerne 2006-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 18
INSTALL GUIDE Cadillac DTS 2006-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 19
Cadillac DTS 2006-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 20
Cadillac DTS 2006-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 21
Cadillac DTS 2006-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 22
Cadillac DTS 2006-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 23
Cadillac DTS 2006-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 24
Cadillac DTS 2006-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 25
INSTALL GUIDE Cadillac Escalade 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 26
Cadillac Escalade 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 27
Cadillac Escalade 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 28
Cadillac Escalade 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 29
Cadillac Escalade 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 30
Cadillac Escalade 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 31
Cadillac Escalade 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A P
PAGE 32
INSTALL GUIDE Cadillac Escalade WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 33
Cadillac Escalade WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 34
Cadillac Escalade WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 35
Cadillac Escalade WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 36
Cadillac Escalade WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 37
Cadillac Escalade WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 38
Cadillac Escalade WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whit
PAGE 39
INSTALL GUIDE Cadillac Escalade without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 40
Cadillac Escalade without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 41
Cadillac Escalade without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 42
Cadillac Escalade without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 43
Cadillac Escalade without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE -
PAGE 44
Cadillac Escalade without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 45
Cadillac Escalade without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/W
PAGE 46
INSTALL GUIDE Chevrolet Avalanche 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 47
Chevrolet Avalanche 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 48
Chevrolet Avalanche 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 49
Chevrolet Avalanche 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 50
Chevrolet Avalanche 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 51
Chevrolet Avalanche 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 52
Chevrolet Avalanche 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 53
INSTALL GUIDE Chevrolet Avalanche WITH NAV 2012-2013 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 54
Chevrolet Avalanche WITH NAV 2012-2013 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 55
Chevrolet Avalanche WITH NAV 2012-2013 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 56
Chevrolet Avalanche WITH NAV 2012-2013 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 57
Chevrolet Avalanche WITH NAV 2012-2013 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 58
Chevrolet Avalanche WITH NAV 2012-2013 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 59
Chevrolet Avalanche WITH NAV 2012-2013 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Wh
PAGE 60
INSTALL GUIDE Chevrolet Avalanche without NAV 2012-2013 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 61
Chevrolet Avalanche without NAV 2012-2013 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 62
Chevrolet Avalanche without NAV 2012-2013 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 63
Chevrolet Avalanche without NAV 2012-2013 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 64
Chevrolet Avalanche without NAV 2012-2013 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE
PAGE 65
Chevrolet Avalanche without NAV 2012-2013 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 66
Chevrolet Avalanche without NAV 2012-2013 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green
PAGE 67
INSTALL GUIDE Chevrolet Equinox 2007-2009 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 68
Chevrolet Equinox 2007-2009 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 69
Chevrolet Equinox 2007-2009 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 70
Chevrolet Equinox 2007-2009 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 71
Chevrolet Equinox 2007-2009 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 72
Chevrolet Equinox 2007-2009 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 73
Chevrolet Equinox 2007-2009 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A P
PAGE 74
INSTALL GUIDE Chevrolet Express WITH NAV 2013-2018 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 75
Chevrolet Express WITH NAV 2013-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 76
Chevrolet Express WITH NAV 2013-2018 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 77
Chevrolet Express WITH NAV 2013-2018 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 78
Chevrolet Express WITH NAV 2013-2018 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 79
Chevrolet Express WITH NAV 2013-2018 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 80
Chevrolet Express WITH NAV 2013-2018 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whit
PAGE 81
INSTALL GUIDE Chevrolet Express without NAV 2008-2018 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 82
Chevrolet Express without NAV 2008-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 83
Chevrolet Express without NAV 2008-2018 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 84
Chevrolet Express without NAV 2008-2018 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 85
Chevrolet Express without NAV 2008-2018 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE -
PAGE 86
Chevrolet Express without NAV 2008-2018 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 87
Chevrolet Express without NAV 2008-2018 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/W
PAGE 88
INSTALL GUIDE Chevrolet Impala 2006-2013 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 89
Chevrolet Impala 2006-2013 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 90
Chevrolet Impala 2006-2013 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 91
Chevrolet Impala 2006-2013 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 92
Chevrolet Impala 2006-2013 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 93
Chevrolet Impala 2006-2013 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 94
Chevrolet Impala 2006-2013 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pi
PAGE 95
INSTALL GUIDE Chevrolet Impala Limited 2014-2016 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 96
Chevrolet Impala Limited 2014-2016 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 97
Chevrolet Impala Limited 2014-2016 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 98
Chevrolet Impala Limited 2014-2016 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 99
Chevrolet Impala Limited 2014-2016 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 100
Chevrolet Impala Limited 2014-2016 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 101
Chevrolet Impala Limited 2014-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 102
INSTALL GUIDE Chevrolet Monte Carlo 2006-2007 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 103
Chevrolet Monte Carlo 2006-2007 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 104
Chevrolet Monte Carlo 2006-2007 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 105
Chevrolet Monte Carlo 2006-2007 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 106
Chevrolet Monte Carlo 2006-2007 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 107
Chevrolet Monte Carlo 2006-2007 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 108
Chevrolet Monte Carlo 2006-2007 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/
PAGE 109
INSTALL GUIDE Chevrolet Silverado 1500 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 110
Chevrolet Silverado 1500 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 111
Chevrolet Silverado 1500 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 112
Chevrolet Silverado 1500 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 113
Chevrolet Silverado 1500 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 114
Chevrolet Silverado 1500 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 115
Chevrolet Silverado 1500 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 116
INSTALL GUIDE Chevrolet Silverado 1500 WITH NAV 2012-2013 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 117
Chevrolet Silverado 1500 WITH NAV 2012-2013 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 118
Chevrolet Silverado 1500 WITH NAV 2012-2013 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 119
Chevrolet Silverado 1500 WITH NAV 2012-2013 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 120
Chevrolet Silverado 1500 WITH NAV 2012-2013 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 121
Chevrolet Silverado 1500 WITH NAV 2012-2013 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 122
Chevrolet Silverado 1500 WITH NAV 2012-2013 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Gre
PAGE 123
INSTALL GUIDE Chevrolet Silverado 1500 without NAV 2012-2013 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 124
Chevrolet Silverado 1500 without NAV 2012-2013 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 125
Chevrolet Silverado 1500 without NAV 2012-2013 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 126
Chevrolet Silverado 1500 without NAV 2012-2013 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 127
Chevrolet Silverado 1500 without NAV 2012-2013 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/W
PAGE 128
Chevrolet Silverado 1500 without NAV 2012-2013 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 129
Chevrolet Silverado 1500 without NAV 2012-2013 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink
PAGE 130
INSTALL GUIDE Chevrolet Silverado 2500 & 3500 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 131
Chevrolet Silverado 2500 & 3500 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 132
Chevrolet Silverado 2500 & 3500 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 133
Chevrolet Silverado 2500 & 3500 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 134
Chevrolet Silverado 2500 & 3500 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE
PAGE 135
Chevrolet Silverado 2500 & 3500 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 136
Chevrolet Silverado 2500 & 3500 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green
PAGE 137
INSTALL GUIDE Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 138
Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 139
Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 140
Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 141
Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-)
PAGE 142
Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 143
Chevrolet Silverado 2500 & 3500 without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA)
PAGE 144
INSTALL GUIDE Chevrolet Silverado 2500 WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 145
Chevrolet Silverado 2500 WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 146
Chevrolet Silverado 2500 WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 147
Chevrolet Silverado 2500 WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 148
Chevrolet Silverado 2500 WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 149
Chevrolet Silverado 2500 WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 150
Chevrolet Silverado 2500 WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Gre
PAGE 151
INSTALL GUIDE Chevrolet Suburban 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 152
Chevrolet Suburban 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 153
Chevrolet Suburban 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 154
Chevrolet Suburban 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 155
Chevrolet Suburban 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 156
Chevrolet Suburban 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 157
Chevrolet Suburban 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 158
INSTALL GUIDE Chevrolet Suburban WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 159
Chevrolet Suburban WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 160
Chevrolet Suburban WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 161
Chevrolet Suburban WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 162
Chevrolet Suburban WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 163
Chevrolet Suburban WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 164
Chevrolet Suburban WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whi
PAGE 165
INSTALL GUIDE Chevrolet Suburban without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 166
Chevrolet Suburban without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 167
Chevrolet Suburban without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 168
Chevrolet Suburban without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 169
Chevrolet Suburban without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE -
PAGE 170
Chevrolet Suburban without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 171
Chevrolet Suburban without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/
PAGE 172
INSTALL GUIDE Chevrolet Tahoe 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 173
Chevrolet Tahoe 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 174
Chevrolet Tahoe 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 175
Chevrolet Tahoe 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 176
Chevrolet Tahoe 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 177
Chevrolet Tahoe 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 178
Chevrolet Tahoe 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pin
PAGE 179
INSTALL GUIDE Chevrolet Tahoe WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 180
Chevrolet Tahoe WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 181
Chevrolet Tahoe WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 182
Chevrolet Tahoe WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 183
Chevrolet Tahoe WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 184
Chevrolet Tahoe WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 185
Chevrolet Tahoe WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 186
INSTALL GUIDE Chevrolet Tahoe without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 187
Chevrolet Tahoe without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 188
Chevrolet Tahoe without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 189
Chevrolet Tahoe without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 190
Chevrolet Tahoe without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AM
PAGE 191
Chevrolet Tahoe without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 192
Chevrolet Tahoe without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whi
PAGE 193
INSTALL GUIDE Chevrolet Traverse 2009-2017 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 194
Chevrolet Traverse 2009-2017 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 195
Chevrolet Traverse 2009-2017 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 196
Chevrolet Traverse 2009-2017 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 197
Chevrolet Traverse 2009-2017 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 198
Chevrolet Traverse 2009-2017 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 199
Chevrolet Traverse 2009-2017 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 200
INSTALL GUIDE GMC Acadia 2007-2016 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 201
GMC Acadia 2007-2016 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 202
GMC Acadia 2007-2016 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 203
GMC Acadia 2007-2016 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 204
GMC Acadia 2007-2016 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 205
GMC Acadia 2007-2016 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 206
GMC Acadia 2007-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink Au
PAGE 207
INSTALL GUIDE GMC Savana WITH NAV 2013-2018 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 208
GMC Savana WITH NAV 2013-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 209
GMC Savana WITH NAV 2013-2018 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 210
GMC Savana WITH NAV 2013-2018 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 211
GMC Savana WITH NAV 2013-2018 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 212
GMC Savana WITH NAV 2013-2018 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 213
GMC Savana WITH NAV 2013-2018 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 214
INSTALL GUIDE GMC Savana without NAV 2008-2018 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 215
GMC Savana without NAV 2008-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 216
GMC Savana without NAV 2008-2018 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 217
GMC Savana without NAV 2008-2018 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 218
GMC Savana without NAV 2008-2018 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 219
GMC Savana without NAV 2008-2018 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 220
GMC Savana without NAV 2008-2018 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N
PAGE 221
INSTALL GUIDE GMC Sierra 1500 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 222
GMC Sierra 1500 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 223
GMC Sierra 1500 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 224
GMC Sierra 1500 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 225
GMC Sierra 1500 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 226
GMC Sierra 1500 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 227
GMC Sierra 1500 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pin
PAGE 228
INSTALL GUIDE GMC Sierra 1500 WITH NAV 2012-2013 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 229
GMC Sierra 1500 WITH NAV 2012-2013 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 230
GMC Sierra 1500 WITH NAV 2012-2013 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 231
GMC Sierra 1500 WITH NAV 2012-2013 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 232
GMC Sierra 1500 WITH NAV 2012-2013 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 233
GMC Sierra 1500 WITH NAV 2012-2013 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 234
GMC Sierra 1500 WITH NAV 2012-2013 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 235
INSTALL GUIDE GMC Sierra 1500 without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 236
GMC Sierra 1500 without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 237
GMC Sierra 1500 without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 238
GMC Sierra 1500 without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 239
GMC Sierra 1500 without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AM
PAGE 240
GMC Sierra 1500 without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 241
GMC Sierra 1500 without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whi
PAGE 242
INSTALL GUIDE GMC Sierra 2500 & 3500 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 243
GMC Sierra 2500 & 3500 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 244
GMC Sierra 2500 & 3500 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 245
GMC Sierra 2500 & 3500 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 246
GMC Sierra 2500 & 3500 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 247
GMC Sierra 2500 & 3500 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 248
GMC Sierra 2500 & 3500 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N
PAGE 249
INSTALL GUIDE GMC Sierra 2500 & 3500 without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 250
GMC Sierra 2500 & 3500 without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 251
GMC Sierra 2500 & 3500 without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 252
GMC Sierra 2500 & 3500 without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 253
GMC Sierra 2500 & 3500 without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHI
PAGE 254
GMC Sierra 2500 & 3500 without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 255
GMC Sierra 2500 & 3500 without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Gr
PAGE 256
INSTALL GUIDE GMC Sierra 2500 WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 257
GMC Sierra 2500 WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 258
GMC Sierra 2500 WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 259
GMC Sierra 2500 WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 260
GMC Sierra 2500 WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 261
GMC Sierra 2500 WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 262
GMC Sierra 2500 WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 263
INSTALL GUIDE GMC Yukon 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 264
GMC Yukon 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 265
GMC Yukon 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 266
GMC Yukon 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 267
GMC Yukon 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 268
GMC Yukon 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 269
GMC Yukon 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink Aut
PAGE 270
INSTALL GUIDE GMC Yukon WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 271
GMC Yukon WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 272
GMC Yukon WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 273
GMC Yukon WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 274
GMC Yukon WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 275
GMC Yukon WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 276
GMC Yukon WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A
PAGE 277
INSTALL GUIDE GMC Yukon without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 278
GMC Yukon without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 279
GMC Yukon without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 280
GMC Yukon without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 281
GMC Yukon without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 282
GMC Yukon without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 283
GMC Yukon without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/
PAGE 284
INSTALL GUIDE GMC Yukon XL 2007-2011 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 285
GMC Yukon XL 2007-2011 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 286
GMC Yukon XL 2007-2011 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 287
GMC Yukon XL 2007-2011 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 288
GMC Yukon XL 2007-2011 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 289
GMC Yukon XL 2007-2011 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 290
GMC Yukon XL 2007-2011 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 291
INSTALL GUIDE GMC Yukon XL WITH NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 292
GMC Yukon XL WITH NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 293
GMC Yukon XL WITH NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 294
GMC Yukon XL WITH NAV 2012-2014 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 295
GMC Yukon XL WITH NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 296
GMC Yukon XL WITH NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 297
GMC Yukon XL WITH NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/
PAGE 298
INSTALL GUIDE GMC Yukon XL without NAV 2012-2014 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 299
GMC Yukon XL without NAV 2012-2014 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 300
GMC Yukon XL without NAV 2012-2014 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle.
PAGE 301
GMC Yukon XL without NAV 2012-2014 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 302
GMC Yukon XL without NAV 2012-2014 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 303
GMC Yukon XL without NAV 2012-2014 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 304
GMC Yukon XL without NAV 2012-2014 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 305
INSTALL GUIDE Hummer H2 2008-2009 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 306
Hummer H2 2008-2009 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before Installing 3 Installation Instructions 4 Wiring Diagram with an Ampliﬁer 5 Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct ﬁrmware for your vehicle and that you carefully review the install guide.
PAGE 307
Hummer H2 2008-2009 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 308
Hummer H2 2008-2009 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 309
Hummer H2 2008-2009 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 310
Hummer H2 2008-2009 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 311
Hummer H2 2008-2009 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink Aut
PAGE 312
INSTALL GUIDE Saturn Outlook 2007-2010 Retains steering wheel controls, onstar, bluetooth, xm satellite and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM5+ Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS05-DS NOTICE: Automotive Data Solutions Inc.
PAGE 313
Saturn Outlook 2007-2010 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 314
Saturn Outlook 2007-2010 BEFORE INSTALLING STEP 2 STEP 1 IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER: Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifier and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits. METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit.
PAGE 315
Saturn Outlook 2007-2010 INSTALLATION INSTRUCTIONS AMPLIFIER ONLY STEP 1 DETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS • Unbox the aftermarket radio and locate its main harness. • Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
PAGE 316
Saturn Outlook 2007-2010 WIRING DIAGRAM with an Amplifier STEP 1 CONNECT TO RADIO WITH LOW LEVEL OUTPUT: WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK OR STEP 4 LF SPEAKER RF SPEAKER LR SPEAKER RR SPEAKER CONNECT TO RADIO WITH HIGH LEVEL OUTPUT: WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 317
Saturn Outlook 2007-2010 WIRING DIAGRAM without an Amplifier STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS STEP 4 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 318
Saturn Outlook 2007-2010 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink
PAGE 319
SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. 2 Print only the pages for your vehicle using the advanced options in the Print menu. 3 Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. NOTICE: Automotive Data Solutions Inc.
PAGE 320
INSTALL GUIDE Chevrolet Cruze with AMP 2011-2016 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 321
Chevrolet Cruze with AMP 2011-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 322
Chevrolet Cruze with AMP 2011-2016 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 323
Chevrolet Cruze with AMP 2011-2016 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 324
Chevrolet Cruze with AMP 2011-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 325
INSTALL GUIDE Chevrolet Cruze without AMP 2011-2016 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 326
Chevrolet Cruze without AMP 2011-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 327
Chevrolet Cruze without AMP 2011-2016 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 328
Chevrolet Cruze without AMP 2011-2016 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 329
Chevrolet Cruze without AMP 2011-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whi
PAGE 330
INSTALL GUIDE Chevrolet Malibu with AMP 2013-2015 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 331
Chevrolet Malibu with AMP 2013-2015 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 332
Chevrolet Malibu with AMP 2013-2015 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 333
Chevrolet Malibu with AMP 2013-2015 WIRING DIAGRAM with an Amplifier STEP 5 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 334
Chevrolet Malibu with AMP 2013-2015 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 335
INSTALL GUIDE Chevrolet Malibu without AMP 2013-2015 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 336
Chevrolet Malibu without AMP 2013-2015 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 337
Chevrolet Malibu without AMP 2013-2015 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 338
Chevrolet Malibu without AMP 2013-2015 WIRING DIAGRAM without an Amplifier STEP 5 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 339
Chevrolet Malibu without AMP 2013-2015 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Wh
PAGE 340
INSTALL GUIDE Chevrolet Sonic with AMP 2012-2016 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 341
Chevrolet Sonic with AMP 2012-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 342
Chevrolet Sonic with AMP 2012-2016 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 343
Chevrolet Sonic with AMP 2012-2016 WIRING DIAGRAM with an Amplifier STEP 4 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 344
Chevrolet Sonic with AMP 2012-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 345
INSTALL GUIDE Chevrolet Sonic without AMP 2012-2016 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 346
Chevrolet Sonic without AMP 2012-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 347
Chevrolet Sonic without AMP 2012-2016 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 348
Chevrolet Sonic without AMP 2012-2016 WIRING DIAGRAM without an Amplifier STEP 4 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 349
Chevrolet Sonic without AMP 2012-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whi
PAGE 350
INSTALL GUIDE Chevrolet Spark with AMP 2013-2015 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 351
Chevrolet Spark with AMP 2013-2015 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 352
Chevrolet Spark with AMP 2013-2015 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 353
Chevrolet Spark with AMP 2013-2015 WIRING DIAGRAM with an Amplifier STEP 4 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 354
Chevrolet Spark with AMP 2013-2015 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 355
INSTALL GUIDE Chevrolet Spark without AMP 2013-2015 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 356
Chevrolet Spark without AMP 2013-2015 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 357
Chevrolet Spark without AMP 2013-2015 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 358
Chevrolet Spark without AMP 2013-2015 WIRING DIAGRAM without an Amplifier STEP 4 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 359
Chevrolet Spark without AMP 2013-2015 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whi
PAGE 360
INSTALL GUIDE Chevrolet Trax with AMP 2010-2016 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 361
Chevrolet Trax with AMP 2010-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 362
Chevrolet Trax with AMP 2010-2016 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 363
Chevrolet Trax with AMP 2010-2016 WIRING DIAGRAM with an Amplifier STEP 4 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 364
Chevrolet Trax with AMP 2010-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/White
PAGE 365
INSTALL GUIDE Chevrolet Trax without AMP 2010-2016 Retains OnStar, steering wheel controls and more! PRODUCTS REQUIRED iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro GM2 Installation Harness OPTIONAL ACCESSORIES Click here for: Radar Integration Installation Guide Radar Integration Owner’s Guide for Kenwood and JVC Radios E L E C T R O N I C S PROGRAMMED FIRMWARE ADS-RR(SR)-GMS02-DS NOTICE: Automotive Data Solutions Inc.
PAGE 366
Chevrolet Trax without AMP 2010-2016 WELCOME Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 367
Chevrolet Trax without AMP 2010-2016 INSTALLATION INSTRUCTIONS STEP 1 TROUBLESHOOTING TIPS: • To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
PAGE 368
Chevrolet Trax without AMP 2010-2016 WIRING DIAGRAM without an Amplifier STEP 4 STEP 1 CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 369
Chevrolet Trax without AMP 2010-2016 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Illumination (+) Orange N/A Orange/White Orange/White Reverse Light (+) Purple/White Orange/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N/A N/A VSS (vehicle speed sensor) (DATA) Pink Green/Whit