Owner's Manual

ADS-RR(SR)-GMS05-DS maestro.idatalink.com
gmc sieRRa 1500 without nav 2012-2014
Automotive Data Solutions Inc. © 2018
3
BEFORE INSTALLING
STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A
FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They
are usually on the speaker covers or on the radio unit. If you
fi nd any of the following logos Bose, Pioneer or Monsoon, you
have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box.
This sticker will indicate all the Regular Production Option
(RPO) codes. If you fi nd any of the following codes UQA, UQS
or UQG, you have a factory amplifi er.
STEP 2
IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY
AMPLIFIER:
Follow the installation instructions and complete the
installation as shown in the wiring diagram with an amplifi er
and read the “AMPLIFIER ONLY” note to determine if you
should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY
AMPLIFIER:
Follow the installation instructions and complete the
installation as shown in the wiring diagram without an
amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4U
B58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07
EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34
K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSS
R4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFI
UF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9
YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 692
7YT
BC/CC U 8555 692
143 5 FXWH2Q CKI5753
2GCEK19N031344764