Owner's Manual

ManualsBrandsiDatalink ManualsAudio accessories & installationInterface Harness

Table Of Contents

Install Guide

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁ ed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

Summary of content (89 pages)

PAGE 1
SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. 2 Print only the pages for your vehicle using the advanced options in the Print menu. 3 Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. NOTICE: Automotive Data Solutions Inc.
PAGE 2
INSTALL GUIDE 2015-2018 Chevrolet Colorado RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 3
Chevrolet Colorado 2015-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 4
Chevrolet Colorado 2015-2018 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 5
Chevrolet Colorado 2015-2018 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 6
Chevrolet Colorado 2015-2018 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 7
Chevrolet Colorado 2015-2018 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Wire Color on Sony cable Illumination (+) Orange N/A Orange/White Orange/White Orange Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/
PAGE 8
Chevrolet Colorado 2015-2018 VEHICLE WIRE REFERENCE CHART Wire Description Connector Name Connector Color Connector Type Position Wire Color Polarity Wire Location Subwoofer ~ ~ 8 pin 01 DkBlue/Gray (+) Ampliﬁer, in dashboard, to the right of the glove box Subwoofer ~ ~ 8 pin 05 Gray/Black (-) Ampliﬁer, in dashboard, to the right of the glove box RF Speaker ~ ~ 8 pin 02 Yellow (+) Ampliﬁer, in dashboard, to the right of the glove box RF Speaker ~ ~ 8 pin 06 Yellow/Black
PAGE 9
Chevrolet Colorado 2015-2018 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended. Reset the RR.
PAGE 10
INSTALL GUIDE 2014-2018 Chevrolet Silverado 1500 With 4.2" and 8" radios RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 11
Chevrolet Silverado 1500 With 4.2" and 8" radios 2014-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 12
Chevrolet Silverado 1500 With 4.2" and 8" radios 2014-2018 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 13
Chevrolet Silverado 1500 With 4.2" and 8" radios 2014-2018 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 14
Chevrolet Silverado 1500 With 4.2" and 8" radios 2014-2018 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 15
Chevrolet Silverado 1500 With 4.
PAGE 16
Chevrolet Silverado 1500 With 4.
PAGE 17
Chevrolet Silverado 1500 With 4.2" and 8" radios 2014-2018 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps.
PAGE 18
INSTALL GUIDE 2015-2019 Chevrolet Silverado 2500 & 3500 With 4.2" and 8" radios RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 19
Chevrolet Silverado 2500 & 3500 With 4.2" and 8" radios 2015-2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 20
Chevrolet Silverado 2500 & 3500 With 4.2" and 8" radios 2015-2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 21
Chevrolet Silverado 2500 & 3500 With 4.2" and 8" radios 2015-2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 22
Chevrolet Silverado 2500 & 3500 With 4.2" and 8" radios 2015-2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 23
Chevrolet Silverado 2500 & 3500 With 4.
PAGE 24
Chevrolet Silverado 2500 & 3500 With 4.
PAGE 25
Chevrolet Silverado 2500 & 3500 With 4.2" and 8" radios 2015-2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps.
PAGE 26
INSTALL GUIDE 2019 Chevrolet Silverado Classic With 4.2" and 8" radios RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 27
Chevrolet Silverado Classic With 4.2" and 8" radios 2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 28
Chevrolet Silverado Classic With 4.2" and 8" radios 2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 29
Chevrolet Silverado Classic With 4.2" and 8" radios 2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 30
Chevrolet Silverado Classic With 4.2" and 8" radios 2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 31
Chevrolet Silverado Classic With 4.
PAGE 32
Chevrolet Silverado Classic With 4.
PAGE 33
Chevrolet Silverado Classic With 4.2" and 8" radios 2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps.
PAGE 34
INSTALL GUIDE 2015-2019 Chevrolet Suburban RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 35
Chevrolet Suburban 2015-2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 36
Chevrolet Suburban 2015-2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 37
Chevrolet Suburban 2015-2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 38
Chevrolet Suburban 2015-2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 39
Chevrolet Suburban 2015-2019 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Wire Color on Sony cable Illumination (+) Orange N/A Orange/White Orange/White Orange Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/
PAGE 40
Chevrolet Suburban 2015-2019 VEHICLE WIRE REFERENCE CHART Wire Description Connector Name Connector Color Connector Type Position Wire Color Polarity Wire Location Subwoofer ~ ~ 8 pin 01 DkBlue/Gray (+) Ampliﬁer, left side of cargo area, behind wheel well Subwoofer ~ ~ 8 pin 05 Gray/Black (-) Ampliﬁer, left side of cargo area, behind wheel well RF Speaker ~ ~ 8 pin 02 Yellow (+) Ampliﬁer, left side of cargo area, behind wheel well RF Speaker ~ ~ 8 pin 06 Yellow/Black (
PAGE 41
Chevrolet Suburban 2015-2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended. Reset the RR.
PAGE 42
INSTALL GUIDE 2015-2019 Chevrolet Tahoe RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 43
Chevrolet Tahoe 2015-2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 44
Chevrolet Tahoe 2015-2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 45
Chevrolet Tahoe 2015-2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 46
Chevrolet Tahoe 2015-2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 47
Chevrolet Tahoe 2015-2019 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Wire Color on Sony cable Illumination (+) Orange N/A Orange/White Orange/White Orange Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A
PAGE 48
Chevrolet Tahoe 2015-2019 VEHICLE WIRE REFERENCE CHART Wire Description Connector Name Connector Color Connector Type Position Wire Color Polarity Wire Location Subwoofer ~ ~ 8 pin 01 DkBlue/Gray (+) Ampliﬁer, left side of cargo area, behind wheel well Subwoofer ~ ~ 8 pin 05 Gray/Black (-) Ampliﬁer, left side of cargo area, behind wheel well RF Speaker ~ ~ 8 pin 02 Yellow (+) Ampliﬁer, left side of cargo area, behind wheel well RF Speaker ~ ~ 8 pin 06 Yellow/Black (-)
PAGE 49
Chevrolet Tahoe 2015-2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended. Reset the RR.
PAGE 50
INSTALL GUIDE 2015-2018 GMC Canyon RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 51
GMC Canyon 2015-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 52
GMC Canyon 2015-2018 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle. If the vehicle DOES NOT have a factory amplifier: STEP 6 complete the installation as shown in the wiring diagram without an amplifier.
PAGE 53
GMC Canyon 2015-2018 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 54
GMC Canyon 2015-2018 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 55
GMC Canyon 2015-2018 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Wire Color on Sony cable Illumination (+) Orange N/A Orange/White Orange/White Orange Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A VSS (
PAGE 56
GMC Canyon 2015-2018 VEHICLE WIRE REFERENCE CHART Wire Description Connector Name Connector Color Connector Type Position Wire Color Polarity Wire Location Subwoofer ~ ~ 8 pin 01 DkBlue/Gray (+) Ampliﬁer, in dashboard, to the right of the glove box Subwoofer ~ ~ 8 pin 05 Gray/Black (-) Ampliﬁer, in dashboard, to the right of the glove box RF Speaker ~ ~ 8 pin 02 Yellow (+) Ampliﬁer, in dashboard, to the right of the glove box RF Speaker ~ ~ 8 pin 06 Yellow/Black (-) A
PAGE 57
GMC Canyon 2015-2018 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended. Reset the RR.
PAGE 58
INSTALL GUIDE 2014-2018 GMC Sierra 1500 With 4.2" and 8" radios RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 59
GMC Sierra 1500 With 4.2" and 8" radios 2014-2018 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 60
GMC Sierra 1500 With 4.2" and 8" radios 2014-2018 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 61
GMC Sierra 1500 With 4.2" and 8" radios 2014-2018 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 62
GMC Sierra 1500 With 4.2" and 8" radios 2014-2018 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 63
GMC Sierra 1500 With 4.
PAGE 64
GMC Sierra 1500 With 4.
PAGE 65
GMC Sierra 1500 With 4.2" and 8" radios 2014-2018 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
PAGE 66
INSTALL GUIDE 2015-2019 GMC Sierra 2500 & 3500 With 4.2" and 8" radios RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 67
GMC Sierra 2500 & 3500 With 4.2" and 8" radios 2015-2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 68
GMC Sierra 2500 & 3500 With 4.2" and 8" radios 2015-2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 69
GMC Sierra 2500 & 3500 With 4.2" and 8" radios 2015-2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 70
GMC Sierra 2500 & 3500 With 4.2" and 8" radios 2015-2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 71
GMC Sierra 2500 & 3500 With 4.
PAGE 72
GMC Sierra 2500 & 3500 With 4.
PAGE 73
GMC Sierra 2500 & 3500 With 4.2" and 8" radios 2015-2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps.
PAGE 74
INSTALL GUIDE 2019 GMC Sierra Classic With 4.2" and 8" radios RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 75
GMC Sierra Classic With 4.2" and 8" radios 2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 76
GMC Sierra Classic With 4.2" and 8" radios 2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 77
GMC Sierra Classic With 4.2" and 8" radios 2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 78
GMC Sierra Classic With 4.2" and 8" radios 2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 79
GMC Sierra Classic With 4.
PAGE 80
GMC Sierra Classic With 4.
PAGE 81
GMC Sierra Classic With 4.2" and 8" radios 2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.
PAGE 82
INSTALL GUIDE 2015-2019 GMC Yukon & Yukon XL RETAINS STEERING WHEEL CONTROLS, ONSTAR, AND MORE! OR PRODUCTS REQUIRED OPTIONAL ACCESSORIES iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro GM3 Installation Harness E L E C T R O N I C S Click here for: Radar Installation Guides PROGRAMMED FIRMWARE ADS-RR(SR)-GM03-DS ADDITIONAL RESOURCES Maestro RR2 Programmable Outputs Guide NOTICE: Automotive Data Solutions Inc.
PAGE 83
GMC Yukon & Yukon XL 2015-2019 WELCOME TABLE OF CONTENTS Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features.
PAGE 84
GMC Yukon & Yukon XL 2015-2019 INSTALLATION INSTRUCTIONS BEFORE INSTALLING STEP 5 • Determine if the vehicle has a Bose ampliﬁer. Look for badges on the radio, door panels, and dash that indicate that the vehicle has Bose. • Plug the male BLACK 3 pin connector of your GM3 T-harness into the OBDII/SW control harness. • Plug the OBDII connector into the OBDII of the vehicle.
PAGE 85
GMC Yukon & Yukon XL 2015-2019 WIRING DIAGRAM without an Amplifier STEP 7 STEP 1 PIONEER RADIO: ENSURE THAT NOTHING IS PLUGGED IN W/R PORT. WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 86
GMC Yukon & Yukon XL 2015-2019 WIRING DIAGRAM with an Amplifier STEP 7 STEP 1 WHITE - LF SPEAKER (+) WHITE/BLACK - LF SPEAKER (-) GRAY - RF SPEAKER (+) GRAY/BLACK - RF SPEAKER (-) GREEN - LR SPEAKER (+) GREEN/BLACK - LR SPEAKER (-) PURPLE - RR SPEAKER (+) PURPLE/BLACK - RR SPEAKER (-) BLUE/WHITE - AMP.
PAGE 87
GMC Yukon & Yukon XL 2015-2019 RADIO WIRE REFERENCE CHART Wire Description Polarity Wire Color on Maestro T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable Wire Color on Sony cable Illumination (+) Orange N/A Orange/White Orange/White Orange Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A
PAGE 88
GMC Yukon & Yukon XL 2015-2019 VEHICLE WIRE REFERENCE CHART Wire Description Connector Name Connector Color Connector Type Position Wire Color Polarity Wire Location Subwoofer ~ ~ 8 pin 01 DkBlue/Gray (+) Ampliﬁer, left side of cargo area, behind wheel well Subwoofer ~ ~ 8 pin 05 Gray/Black (-) Ampliﬁer, left side of cargo area, behind wheel well RF Speaker ~ ~ 8 pin 02 Yellow (+) Ampliﬁer, left side of cargo area, behind wheel well RF Speaker ~ ~ 8 pin 06 Yellow/Black
PAGE 89
GMC Yukon & Yukon XL 2015-2019 TROUBLESHOOTING TABLE PROBLEM SOLUTION Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended. Reset the RR.