Owner's Manual

ADS-RR(SR)-JGC1-DS-IG-EN maestro.idatalink.com
Jeep Grand Cherokee 2014-2017
Automotive Data Solutions Inc. © 2020
4
Fig. 2.2
Fig. 2.3
Fig. 2.4Fig. 2.0
Fig. 2.1
INSTALLATION INSTRUCTIONS
1
MEDIA PORT REPLACEMENT
1. Remove the torx set-screw securing the shifter. Using a
panel tool, pry the center console/shifter bezel upward.
Disconnect and remove. (Fig. 2.0)
(Center console type 2) Using a pry tool, gently remove the
top section of the shifter then remove the single torx screw
securing it in place. (Fig. 2.1)
2. Remove (4) 7mm screws securing the bottom of the pocket,
and (2) screws at the top. Unplug the connector at the top
of the pocket. (Fig. 2.2)
3. Pull the tray. Unplug the 4 connectors from the back of the
media hub (behind the tray) and remove the tray. (Fig. 2.3)
4. Remove (4) torx screws from the media hub and remove it.
Replace the media hub with the usb ports supplied with the
JGC1. Reasemble in reverse order. (Fig. 2.4)