Installation Instructions

C-Channel Attachment

(Non-Windload Doors Only)

If you have a windload door, refer to instructions or

drawing provided with door.

Insulated Sandwich Doors Only

Before installation of hinges, tear the liner off the

adhesive on the EPS backer plates and apply

vertically across the section at each center hinge

location. (FIG. 4-S)

All Doors

While Section is still on sawhorses, place

C-Channel in the middle of section, with open end

facing down. Using the access holes at each end

of the C-Channel, attach (1) #14 x

/4" self-drilling

screw through the bottom of the C-Channel and

into the Stile or EPS Backer Plate.

All Doors

Attach the C-Channel straps to the channel and

the stile (or EPS backer plate), using (3) #14 x

/4"

self-drilling screws, at right. One strap is to go on

each end of the channel, and a strap is to be

placed at each center stile location.

ASSEMBLED

Center

Stile Or

EPS

Backer

Plate

Double End Stile

C-Channel

Strap

#14 x

/4"

Self-Drilling Screw

Fig. 4-S