Installation Instructions

15
Fig. 1-T
3. Type of mounting - Bracket mounting is used
on lighter doors with wood jambs. Brackets are
loose or riveted into place. Loose brackets are
attached to the track with (1)
1
/4" x
5
/8" track bolt
and nut per bracket. Continuous angle and
reverse angle track are shipped with mounting
angle attached. Loosen nuts on track bolts so
track will slide on the angle. (FIG.1-T)
BRACKET MOUNT
(2)
1
/4" x
5
/8" Track Bolts
& Flange Nuts
CONTINUOUS ANGLE
Rivet
(2) Each Bracket
1
/4" x
5
/8" Track
Bolts & Flange
Nuts
REVERSE ANGLE
Vertical
Track
1
/4" x
5
/8" Track
Bolts & Flange
Nuts
Vertical
Track
Commercial Flag
Bracket
Rivet
(2) Each Bracket
Vertical
Track
Bracket
Rivet
(2) Each Bracket
Track Installation
General Information. There are three basic pieces
of information about your tracks that you need to
know to start installation.
1. Track size - Track comes in two sizes: 2" and 3".
2. Type of lift - Each type of lift is different from the
top of the door on up. However, the vertical track
from the floor to the top of the door does not
change between the different lift options.
(FIG. 1-T) Therefore, the vertical track instruc-
tions to the top of the door are explained in one
group (Step 1). Then turn to your specific type
of lift for completion of the installation.
TAPERED REVERSE
ANGLE MOUNT
Vertical
Track
Continuous Angle
Track
Clip
Track
Clip
Reverse Angle
1
/4" x
5
/8"
Track Bolts
& Flange
Nuts
Tapered
Reverse
Angle