Technical Specifications

Ideal Door
®
is a trademark of Clopay Building Products Company, Inc. ©2014 Clopay Building Products Company, Inc., a Griffon company. REID-GDSPRINGSELGUIDEWEB-14
STANDARD TORSION & EZ-SET
®
TORSION SPRINGS
WIRE DIAMETER GUIDE As seen on pages 4 and 6
PLACE FIRST
COIL HERE
IMPORTANT!
.192(3-7/8")
.207(4-1/8")
.218(4-3/8")
.225(4-1/2")
.24 3(4-7/8")
.250(5")
.262(5-1/4")
.275(5-1/2")
.283(5-11/16")
.295(5-7/8")
.306(6-1/8")
.319(6-3/8")
.234(4-11/16")
.177(3-9/16")
MEASURE 20 COILS
is a tradem
Ideal Door
®
is
Idea
1-800-621-3667
Available at
IdealDoorGarageDoors.com
A. Count 20 coils. Using a felt marker or
similar pen, place a mark at the first and
20th coil for easier reference.
B. Measure the 20 coils tight together
using the wire diameter gauge to the
left. Record your wire diameter below.
C. Locate the wire diameter measurement
in the EZ-SET
®
torsion spring chart on
page 4 or the standard torsion spring
chart on page 6 to find your spring.
Figure Wire Diameter
Mark and measure
20 coils tight together
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Mark first coil
Mark 20th coil
If printing this
page, be sure
to print at 100%
without any
page scaling.
To confirm your
printed size is
100%, compare a
ruler to the below
printed scale.
1"
2"
3"
4"