User's Manual

Product Manual
ESC1000 – Downlight/LED Smart Connector
ND 8202-1 11/2015 Users Manual – ESC1000 Emerge Downlight/LED Smart Connector Page 4
www.idealindustries.com
INSTALLING THE ESC1000 SMART CONNECTOR IN THE FIXTURE
1. After properly installing all wires per the instructions, fully extend the antenna. See Fig. 1.
2. Remove the backing of the double-sided tape on the ESC1000, exposing the adhesive.
3. Insert the antenna through an available open hole in the fixture trough, making sure that as
much of the antenna extends into the plenum space above the fixture as possible. See Fig.
4.
4. Firmly press the connector into place.
PROGRAMMING
Fig. 4