User's Manual

ManualsBrandsIdeal Industries ManualsElectronicsLVDC Grid Luminaire Controller

Product Manual

ESCGRID1000 – LVDC Grid Luminaire Controller

ND xxxx-x 06/2016 Users Manual – ESCGRID1000 LVDC Grid Luminaire Controller Page 1

www.idealindustries.com

PRODUCT DESCRIPTION

The LVDC Grid Luminaire Controller is a

wireless device which provides electrical

connectivity between the light fixture (load)

and 24V DC power and provides on/off

power control and PWM based dimming to

the load. The information that tells the

controller to power on/off/dim the fixture is

acquired via wireless signals that originate

from a building automation system or room

controls, based on environmental conditions

and/or predetermined programs.

KEY FEATURES

FCC and IC approved

Small form factor

Integrated Wire Antenna

RoHS compliant

PRODUCT CONTENTS

The following items are included inside the

package:

Qty

Description

ESCGRID1000 Smart Connector

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

All other trademarks are the property of their respective owners.

Summary of content (9 pages)

PAGE 1
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller PRODUCT DESCRIPTION The LVDC Grid Luminaire Controller is a wireless device which provides electrical connectivity between the light fixture (load) and 24V DC power and provides on/off power control and PWM based dimming to the load.
PAGE 2
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller IDEAL Model ESCGRID1000 LVDC Luminaire Controller Installation Instructions WARNING: This is a current rated device. Use in applications involving Amperage beyond its rating can be dangerous and cause electrical fires. Wiring must comply with all applicable electrical codes. LOAD Connection CC Connector 24V DC Bus Fig.
PAGE 3
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller LOAD Connector The LOAD Connector accepts 18 AWG copper conductors, solid or stranded (16 strands or less). Use only one conductor per port and ensure that no copper is exposed on any of the wires after installation. 1. Strip the wires to 3/8”. 2. Grip the LOAD +24V wire and firmly push conductor into the port marked with the black stripe. See Fig. 2. 3. Grip the LOAD -24V wire and firmly push conductor into the unmarked port. See Fig. 2. 4.
PAGE 4
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller MECHANICAL DIMENSIONS *Dimensions in inches ND xxxx-x 06/2016 Users Manual – ESCGRID1000 LVDC Grid Luminaire Controller www.idealindustries.
PAGE 5
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: contactus@idealindustries.com ND xxxx-x 06/2016 Users Manual – ESCGRID1000 LVDC Grid Luminaire Controller www.idealindustries.
PAGE 6
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL INDUSTRIES could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This device complies with part 15 of the FCC Rules.
PAGE 7
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
PAGE 8
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. IDEAL INDUSTRIES, INC. assumes no liability for misuse of this product.
PAGE 9
Product Manual ESCGRID1000 – LVDC Grid Luminaire Controller WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of IDEAL.