User's Manual

ManualsBrandsIdeal Industries ManualsElectronicsLine Dimming Luminaire Controller

Product Manual

SCLINE1000-277 – Line Dimming Luminaire Controller

ND xxxx-1 01/2016 Users Manual – SCLINE1000-277 Downlight/LED Smart

Connector Page 1

www.idealindustries.com

PRODUCT DESCRIPTION

The AC Smart Connector is a wireless device

which provides electrical connectivity

between the light fixture (load) and

120V/277V AC line power and provides

on/off power control and dimming to the

load. The information that tells the

connector to power on/off/dim the fixture is

acquired via wireless signals that originate

from a building automation system or from

room controls, based on environmental

conditions and/or predetermined programs.

KEY FEATURES

FCC and IC approved

External fixture mounting

Small form factor

Integrated Wire Antenna

RoHS compliant

PRODUCT CONTENTS

The following items are included inside the

package:

Qty

Description

SCLINE1000-277 Smart Connector

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

All other trademarks are the property of their respective owners.

Summary of content (8 pages)

PAGE 1
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller PRODUCT DESCRIPTION The AC Smart Connector is a wireless device which provides electrical connectivity between the light fixture (load) and 120V/277V AC line power and provides on/off power control and dimming to the load.
PAGE 2
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller IDEAL Model SCLINE1000-277 Line Dimming Luminare Controller Installation Instructions WARNING: This is a current rated device. Use in applications involving amperage beyond its rating can be dangerous and cause electrical fires. Wiring must comply with all applicable electrical codes. Turn off power before removing or installing connector.
PAGE 3
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller The LOAD(red) and Neutral(White) wire are 18 AWG solid copper conductors. 1. Strip wires to 1/2”. 2. Connect Smart Connector LOAD wire to the ballast hot line with appropriate sized wirenut or push-in connector if necessary. 3. Connect Smart Connector NEUTRAL Output to the ballast neutral with appropriately sized wirenut or push-in connector if necessary. 4. For feed-through (i.e.
PAGE 4
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller MECHANICAL DIMENSIONS *Dimensions in inches ND xxxx-1 01/2016 Connector Users Manual – SCLINE1000-277 Downlight/LED Smart Page 4 www.idealindustries.
PAGE 5
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: contactus@idealindustries.com ND xxxx-1 01/2016 Connector Users Manual – SCLINE1000-277 Downlight/LED Smart Page 5 www.idealindustries.
PAGE 6
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 7
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. IDEAL INDUSTRIES, INC. assumes no liability for misuse of this product.
PAGE 8
Product Manual SCLINE1000-277 – Line Dimming Luminaire Controller WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of IDEAL.