User's Manual

ManualsBrandsIdeal Industries ManualsElectronicsController

Product Manual

SRC2100– 120/277 VAC Single Room Controller

ND xxxx-1 08/2017 Users Manual – SRC2100 Single Room Controller

Page 1

www.idealindustries.com

FPRODUCT DESCRIPTION

The Single Room Controller is a wireless

device which provides electrical connectivity

between the light fixture (load) and

120V/277V AC line power. The SRC2100

provides on/off power control as well as 0-

10V dimming control via dimming signals to

the load. The information which tells the

controller to power on/off/dim the fixture is

acquired via wireless signals that originate

from a system gateway, room controls, and

integrated switches/PIR sensor.

KEY FEATURES

FCC and IC approved

Switch replacement with integrated PCB

antenna.

RoHS compliant

PRODUCT CONTENTS

One of the following items is included inside the

package:

Qty

Description

SRC2100 Single Room Controller

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

Summary of content (10 pages)

PAGE 1
Product Manual SRC2100– 120/277 VAC Single Room Controller FPRODUCT DESCRIPTION The Single Room Controller is a wireless device which provides electrical connectivity between the light fixture (load) and 120V/277V AC line power. The SRC2100 provides on/off power control as well as 010V dimming control via dimming signals to the load.
PAGE 2
Product Manual SRC2100– 120/277 VAC Single Room Controller All other trademarks are the property of their respective owners. IDEAL Model SRC2100 Single Room Controller Instructions WARNING: This is a current rated device. Use in applications involving amperage beyond its rating can be dangerous and cause electrical fires. Wiring must comply with all applicable electrical codes. Turn off power before removing or installing connector.
PAGE 3
Product Manual SRC2100– 120/277 VAC Single Room Controller LOAD The LOAD(red) and Neutral(White) wire are 18 AWG solid copper conductors. 1. Strip wires to 1/2”. 2. Connect Controller LOAD wire to the ballast hot line with appropriate sized wirenut or pushin connector if necessary. 3. Connect Controller NEUTRAL Output to the ballast neutral with appropriately sized wirenut or push-in connector if necessary. 4. For feed-through (i.e.
PAGE 4
Product Manual SRC2100– 120/277 VAC Single Room Controller PROGRAMMING Refer to the Audacy™ system configuration manual to associate smart connectors to other devices and to set up operating parameters for the Audacy™ lighting control system SPECIFICATIONS Item Radio Regulatory Approvals Transmit Range Load Dimming Load Amperage Switching Cycles Power Operating Temperature Storage Temperature Installation Environment Dimensions Weight Warranty ND xxxx-1 08/2017 Description 915 MHz External Antenna FCC P
PAGE 5
Product Manual SRC2100– 120/277 VAC Single Room Controller MECHANICAL DIMENSIONS *Dimensions in inches ND xxxx-1 08/2017 Users Manual – SRC2100 Single Room Controller Page 5 www.idealindustries.
PAGE 6
Product Manual SRC2100– 120/277 VAC Single Room Controller SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: contactus@idealindustries.com ND xxxx-1 08/2017 Users Manual – SRC2100 Single Room Controller Page 6 www.idealindustries.
PAGE 7
Product Manual SRC2100– 120/277 VAC Single Room Controller COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 8
Product Manual SRC2100– 120/277 VAC Single Room Controller accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ND xxxx-1 08/2017 Users Manual – SRC2100 Single Room Controller Page 8 www.idealindustries.
PAGE 9
Product Manual SRC2100– 120/277 VAC Single Room Controller IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. IDEAL INDUSTRIES, INC. assumes no liability for misuse of this product.
PAGE 10
Product Manual SRC2100– 120/277 VAC Single Room Controller WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of IDEAL.