Operation Manual

OTDR 29
Setting Analysis Parameters
To set analysis parameters:
1. Press Menu, select Setup > OTDR, and then
press Select.
2. Display the Analysis pane (F1/F2 key).
3. Use the arrows to select any of the settings,
and then press Select to display the
on-screen keyboard (for details about using
keyboards, see Using Menus and Keypad on page 13).
4. Enter the new value and press OK (F1/F2 key).
As you enter the value, the application indicates the minimum or
maximum value allowed.
To revert to the factory-default settings:
1. Press Menu, select Setup > OTDR, and then press Select.
2. From the Acquisition pane, use the arrows to select Default, and then
press Select.