Operation Manual

Managing Test Results
OTDR 59
Printing Test Results
To revert to the complete graph view:
1. From the Trace pane, use the left/right function arrows until you see
Full Trace.
2. Press Full Trace (F1/F2 key) to revert to complete graph view.
Note: If the Automatic zoom on fiber span feature is selected in the OTDR setup,
the application will zoom in between span start and span end.
Printing Test Results
With a Printek 2” printer, you can print results directly from the IDEAL
OTDR.
Note: You cannot print ping or trace route test results from the IDEAL OTDR.
The unit communicates with the printer through its infrared port.
To print test results:
1. Select the printer (see Selecting a Printer on
page 19).
2. Once a trace has been acquired or
reopened, press Menu, select OTDR, and
then press Select.
3. Select Print (F1/F2 key).