Instructions / Assembly

ManualsBrandsIdeal Pet ManualsKitchen7 in. x 11.25 in. Medium White Vinyl Pet Patio Door Fits 76.75 in. to 78.5 in. Vinyl Sliding Door

Before You Get Started...

• It is important to read all instructions carefully and make sure you have all the parts listed below before

beginning pet door installation.

• Your pet door may be installed on the right or left side depending on which way your sliding door opens.

• There are several lock styles for vinyl sliding doors. See page 6 to determine which lock you have.

• If you need help with any part of the installation, call one of our associates Toll Free at (800) 378-4385

(M–F, 9 am to 4 pm, PST) and they will be happy to help you free of charge.

Installation

Instructions

Patent No. 7784430

Page 1

1. 2 Hangers*

with 4 (#10 x

1-1/2”) Screws

and 6 Spacers*

(POLY BAG #1)

3. 1 Top “H” Section

and 2 (#10 x 5/8”)

Self Drilling

Screws

(POLY BAG #3)

2. 2 Lock Catches* with

4 (#10 x 1”) Self Drilling

Screws and 4 Spacers *

(POLY BAG #2)

6. 2 Draft•Seal™

Flat Pieces*

Parts List –

7. 1 Lock Button Override*

(see page 6)

(POLY BAG #2)

www.idealpetproducts.com

*Parts color may be white

*Parts color

may be

white

*Parts color may be white

As with any home improvement project, if you do not have the tools or skills to properly

install your pet door, we suggest using a professional handyman or licensed contractor.

Tools Required For Installation –

5. 2 Door Seal

Extrusions

Hangers

Spacers

Screws

Spacers

Lock Catch

4. 1 Door Seal

Extension and

8 (#10 x 1”)

Self Drilling Screws

(POLY BAG #4)

Screws

For Standard & Tall Vinyl Patio Pet Doors

Summary of content (8 pages)

PAGE 1
www.idealpetproducts.com Installation Instructions For Standard & Tall Vinyl Patio Pet Doors Before You Get Started... Patent No. 7784430 • It is important to read all instructions carefully and make sure you have all the parts listed below before beginning pet door installation. • Your pet door may be installed on the right or left side depending on which way your sliding door opens. • There are several lock styles for vinyl sliding doors. See page 6 to determine which lock you have.
PAGE 2
Installing Your White Vinyl Patio Pet Door Step #1-Installing the Pet Panel Door Hangers Remove existing Lock Catch plate as it may interfere with your new Vinyl Patio Pet Door Panel. (see Picture #1) If your catch plate is 1” wide or less, you can reinstall into the Vinyl Patio Pet Door. 1 Poly Bag #1 contains 2 Hangers and 4 Screws #10 x 1-1/2” long. 2 Locate position of hangers.
PAGE 3
Installing Your White Vinyl Patio Pet Door (continued) Step #2 – Measuring the “H” Section Gap (5/16”) NOTE: Far end spring will have to be held down to allow “H” Section to slide over spring. 4 Slide “H” Section to edge of door frame. (Do not slide into channel) Insert top “H” section on top of pet door panel (see Picture #4) until it is flush to frame. (see Picture #5) 5 NOTE: “H” Section must be flush with outer frame. Measure the distance from the edge of pet door panel to edge of “H” section.
PAGE 4
Continuing the Installation... Step #3-Install the Top “H” Section Slide Top “H” Section over top of springs until it is flush to frame, making sure that it is 5/16” minimum from the side of door to edge of “H” Section. (see Picture #7 and inset) NOTE: Far end spring will have to be held down to allow “H” Section to slide over spring. 7 Slide “H” Section to edge of door frame.
PAGE 5
Continuing the Installation... Step #5-Secure the Top “H” Section 13 Complete by installing 2 (#10 x 5/8”) Self Drilling Screws through the Top “H” Section into the Vinyl Pet Door Panel on the inside of door. (see Picture #13) Continue to Page 6...
PAGE 6
Continuing the Installation... Step #6-Installing the Lock Catch NOTE: Most sliding doors have an adjustable locking mechanism (see Picture #14). To increase or decrease the locking strength of your door, turn Adjustment Screw in or out. Our instructions will cover the majority of sliding door locks. If your door lock is not compatible with the enclosed lock components, you can use an alternate method of securing your door. Please call us Toll Free at (800) 378-4385 for more information. ...
PAGE 7
Continuing the Installation... Step #7-Installing the Lock Catch (continued) Place Lock Catch onto your existing door lock hook in the up (locked) position. (see Picture #16) 16 Partially close your sliding door so that you can mark the location of the top edge of Lock Catch inside your pet door frame. (see Picture #17) WARNING: SCREWS PROVIDED ARE SELF-TAPPING, NO DRILLING REQUIRED. DO NOT USE DRILL BITS IN ANY PART OF INSTALLATION ON THIS PAGE.
PAGE 8
Finishing the Installation Step #9-Attaching the Draft•Seal™ and Optional Sliding Door Adjustments The Draft•Seal™ (combined in 2 pieces) attaches to the moving section of your sliding glass door. To install the Draft•Seal™, measure the vertical distance, or height of exposed glass between top and bottom frames of the sliding door and using this length, cut Draft•Seal™ to size with scissors.