Instructions / Assembly

Installing Your White Vinyl Patio Pet Door
Step #1-Installing the Pet Panel Door Hangers
Page 2
Continue to Page 3...
3
2
Poly Bag #1 contains 2 Hangers and
4 Screws #10 x 1-1/2” long.
Locate position of hangers. (see Sketch A)
Mark 2 lines inside door frame, the
lower at 5” and the upper at 84-1/2”
(for Tall Door) or, 69” (for Standard Door)
from bottom of track.
Place bottom edge of lower hanger
on the 5” marked line and the upper
hanger at 84-1/2” (for Tall Door) or,
69” (for Standard Door) marked line.
Mark location of hanger screw holes
with pencil and drill 1/8” dia. hole
approx. 1-1/2” deep.
Place hangers in track and install
using #10 x 1-1/2” screws.
(see Picture #2)
Important: Do Not Overtighten
5”
WALL
91-3/16”
(Tall Door)
75-3/4”
(Standard
Door)
84-1/2”
(Tall Door)
69”
(Standard
Door)
Lift and locate Pet Panel in place. (see Picture #3)
84-1/2”
(Tall Door)
69”
(Standard
Door}
5”
Sketch A
1
Remove existing Lock Catch plate as it may interfere with your new
Vinyl Patio Pet Door Panel. (see Picture #1) If your catch plate is
1” wide or less, you can reinstall into the Vinyl Patio Pet Door.