Instructions / Assembly

KEY LOCK
DEADBOLT
DEADBOLT
STRIKE
DEADBOLT
SPINDLE
#6-32
MACHINE
SCREW
#6 X 1"
TAPPING
SCREW
OUTSIDE DOOR
INSIDE DOOR
MAX 1/2"
MIN 1/4"
DEADBOLT SPINDLE PROJECTION
Key Lock & Deadbolt Installation
1. Place key lock on outside of door.
2. Insert a flat spindle from inside through
the center hole into the key lock.
Ensure spindle bottoms into key lock.
(If your door thickness is not standard then:
The spindle should project through
inside of door a max of 1/2" and min of 1/4".
Cut off the spindle beyond that length.)
3. Place deadbolt on inside of door,
fasten with two machine screws.
Do not over tighen screws.
4. Place the strike for deadbolt on jamb,
align with pilot holes on jamb,
fasten with two tapping screws.
Thank you for your purchase.
If you require any information or installation assistance,
please contact our customer service.
Monday to Friday 7:30 am -3 pm (Eastern Time)
Tel: [phone] x 230
e-mail: [e-mail]
Updated instructions (if applicable) can be found at www.idealinc.com
IDEAL SECURITY INC.
LASALLE, QUEBEC, CANADA
CORAOPOLIS, PA., USA
PAGE 4 OF 4