Instructions / Assembly

Page 6 of 17 5/11/2012
f. Press PROG button once (1) to exit set-up mode.
3. TO PROGRAM EMERGENCY TELEPHONE CALL NUMBERS
a. Enter password followed by PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM button to confirm.
d. You are now ready to program up to 5 emergency telephone numbers. Press the
*/UP
or #/DOWN buttons to select memory location from 1 to 5. If you
select 2 this is where your number will be stored and it will be the 2
nd
number
dialed.
e. Enter the telephone number you would like to store, followed by
ARM/DISARM to confirm (maximum of 32 digits, but only displays last 16
digits).
f. Repeat steps C to E for the four other numbers you may wish to store.
g. Press PROG button eight (8) times to exit the set-up mode.
4. TO DELETE A TELEPHONE NUMBER FROM MEMORY
a. Enter password followed by PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM button to confirm.
d. Press */UP or #/DOWN buttons to select the number you want to delete.
e. Press DEL./PAUSE button to delete the number.
f. Press the ARM/DISARM
button to confirm.
g. Press PROG button eight (8) times to exit the set-up mode.
5. PAUSE FUNCTION
The "PAUSE" function can be stored as one digit in the telephone number memory for
some dialing operations. Every one PAUSE in the memory dialing sequence will pause for
3.6 seconds. For example, if you want to store telephone number 514-363-1030
EXTENSION 230 to memory location 2, the operation will be as following:
a. Enter password then press PROG
button twice (2).
b. MEMORY will flash on the auto-dialer screen.
c. Press ARM/DISARM
button to confirm.
d. Press */UP
or #/DOWN button to select memory location 2.