Instructions / Assembly

Page 7 of 17 5/11/2012
e. Enter 5143631030 DEL./PAUSE (hold for 2 seconds until the letter F
appears on the screen, then enter 230.
f. Press ARM/DISARM button to confirm.
g. Press PROG
button eight (8) times to exit set-up mode.
6. TO PROGRAM SIREN ON/OFF
The auto-dialer has been factory pre-set with the siren ON. To change this to OFF:
a. Enter password followed by PROG button four (4) times.
b. The " " icon will flash on the auto-dialer screen. (Fig.8)
c. Press ARM/DISARM to confirm.
d. Using */UP or #/DOWN buttons to select SOUND OFF. Followed by
ARM/DISARM button to confirm.
e. Press PROG button six (6) times to exit the set-up mode.
7. TO PROGRAM AUTO CALL FUNCTION ON/OFF
The auto-dialer has been factory pre-set with the call option ON. If you do not want the
auto dialer to call out change this to OFF:
a. Enter password followed by PROG button five (5) times.
b. The "
" icon will flash on the auto-dialer screen. (Fig.9)
c. Press ARM/DISARM button to confirm.
d. Using */UP or #/DOWN buttons to select call OFF followed by the
ARM/DISARM
button to confirm.
e. Press PROG
button five (5) times to exit the set-up mode.
8. TO PROGRAM AUTO DIALLING CYCLE.