Specification

not enter your own home phone number, as the auto dialer uses your phone line to dial, it
will not work. You must also enter complete phone numbers including area codes, and if
long distance, include the 1.
a. Enter password followed by PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM button to confirm.
d. You are now ready to program up to 5 emergency telephone numbers. Press the
*/UP or #/DOWN buttons to select memory location from 1 to 5. The
numbers will be dialed in the number sequence that they are entered.
e. Enter the telephone number you would like to store, followed by
ARM/DISARM to confirm (maximum of 32 digits, but only displays last 16
digits).
f. Repeat steps c to e for the four other numbers you may wish to store.
g. Press PROG button eight (8) times to exit the set-up mode.
4. TO DELETE A TELEPHONE NUMBERS FROM MEMORY
a. Enter password followed by PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen. (Fig.6)
c. Press ARM/DISARM button to confirm.
d. Press */UP or #/DOWN buttons to select the number you want to delete.
e. Press DEL./PAUSE button to delete the number.
f. Press the ARM/DISARM
button to confirm.
g. Press PROG button eight (8) times to exit the set-up mode.
5. PAUSE FUNCTION
The "PAUSE" function can be stored as one digit in the telephone number memory
for some dialing operations. Every one PAUSE in the memory dialing sequence will
pause for 3.6 seconds. For example, if you want to store telephone number 514-363-1030
EXTENSION 230 to a memory location, the operation will be as follows:
a. Enter password then press PROG button twice (2).
b. MEMORY will flash on the auto-dialer screen.
c. Press ARM/DISARM button to confirm.
d. Press */UP
or #/DOWN button to select a memory location.
e. Enter 5143631030 DEL./PAUSE (hold for 2 seconds until the letter F
appears on the screen, then enter 230.
f. Press ARM/DISARM button to confirm.