Datasheet

www.ideal-tek.com
swiss made
This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.
Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.
High performance plastic type SV
TECHNICAL DATA SHEET
General notes:
» PVDF polyvinylidene uoride carbon bre reinforced
» excellent mechanical strength and toughness
» smooth surface
» heat stabilized, high heat capability, continuous use temperature up to 150°C
» high purity (clean room and medical devices approved, low extraction value)
» excellent chemical resistance to most aggressive substances (mineral and organic acid) and solvents
(hydrocarbons, alcohols, halogenated), resistant to halogens
» outstanding resistance to hydrouoric acid (40% conc., 90°C), nitric acid (50% conc., 90°C), hydrochloric acid
(36% conc., 90°C)
» high abrasion resistant
» resistant to UV and nuclear radiation (sterilisation)
» ESD safe material, (avoid powder attraction, sparks generation, ignition sources)
» typical applications include handling of very scratch- and contamination-sensitive components, cleaning and
etching processes
Temp. of de. under load (1.80 MPa)
158 °C
ASTM D648
Temp. of de. under load (0.45 MPa)
170 °C
ASTM D648
Vicat softening temperature (50°C/h 50N)
172 °C
ISO 306
Coef. of lin. therm expansion, normal
7.00 E-5/°C
ASTM D 696
Continuous Use Temperature
150°C
20’000 h
Short Time Temperature
200°C
Flexural modulus +23°C
7500 MPa
ASTM D 790
Tensile modulus +23°C
8000 MPa
ASTM D638
Tensile strength +23°C
120 MPa
ASTM D638
Flexural strength +23°C
150 MPa
ASTM D790
Shore D hardness
82
ASTM D 2240
Izod-Impact strength (notched) +23°C
110 J/m
ASTM D 256
Mechanical properties
Thermal properties
Surface resistivity
<1.0E5 Ohm
ASTM D257
Volume resistivity
<1.0E3 Ohm.cm
ASTM D257
Electrical properties
Density
1.37 g/ccm
ISO 1183
Water absorption in water 23°C (24h)
0.65%
ISO 62
Other properties