Data Sheet

PCSA Circuit board holder
Pag. 3
PCSA-1
BRIDGE = 0 SPLINT = 2BRIDGE = 1 SPLINT = 2BRIDGE = 1 SPLINT = 4
BRIDGE = 1 SPLINT = 6
Subject to changes. The manufacturer declines any responsability for potential damages to persons or objects due to inappropriate usage.
ideal-tek s.a.
via A. Monti 10, 6828 Balerna (switzerland) Tel. [phone] Fax [phone] [e-mail] www.ideal-tek.com
PCSA-2
PCSA-4
FEATURE:
- Circuit board holders of the PCSA series are the ideal tool for fitting circuit boards with components. The holder can
easily be demounted in single parts and be reassembled in different combinations.
- The standard models PCSA-1/2/4 are equipped with 1 removable middle bridge and 2 adjustable splints. Thus two work
areas can be created.
- Any circuit board holders can be fitted with additional subdivisors (4 for PCSA-1/2 and 6 for PCSA-4).
That way small circuit boards can be used on several levels.
Combinations and work surface in mm