ideal-tek s.a.
PCSA Circuit board holder PCSA-1 work surface: 280x220 Additional splint: BS-PCSS-1 Additional foam: PCSA-1.2 Pag. 2 PCSA-2 PCSA-4 work surface: 510x220 work surface: 510x350 Additional splint: BS-PCSS-2-4 Additional foam: PCSA-2.2 Additional splint: BS-PCSS-2-4 Additional foam: PCSA-4.2 Standard configuration: - 2 splints (sliding rail) - 1 central removable middle bridge - 1 cover - 1 foam rubber ESD safe ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel.
PCSA Circuit board holder Pag. 3 PCSA-2 PCSA-4 FEATURE: - Circuit board holders of the PCSA series are the ideal tool for fitting circuit boards with components. The holder can easily be demounted in single parts and be reassembled in different combinations. - The standard models PCSA-1/2/4 are equipped with 1 removable middle bridge and 2 adjustable splints. Thus two work areas can be created. - Any circuit board holders can be fitted with additional subdivisors (4 for PCSA-1/2 and 6 for PCSA-4).
PCSA Circuit board holder How to use PCSA detachable assembly jigs for pc board Pag. 4 PC Assembly jig with component-press lid closed screwed or clamped to work-top, in relation to the height of the components. Sliding rails may be positioned by means of selflocking sleeves. A system of springs makes it possible to insert and remove printed circuit boards without changing position of sleeves. Turn the knob to remove the middle bridge.
PCSA spare parts Pag. 5 PCSA-1 PCSA-2 BS-PCSS-1: Sliding rail PCSA-1.2: Foam ideal-tek s.a. PCSA-4 BS-PCSS-2-4: Sliding rail PCSA-2.2: Foam PCSA-4.2: Foam via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.
PCSA spare parts Pag. 6 PCSA-1 PCSA-2 PCSA-4 BS-PCSS-NBS: Sliding block MO-BS-PCSS: Spring SF-BS-PCSS: Ball diam. 5 mm IN-PCSS: Cover support AC-PCSA: Bush-Knob-Screw SR-PCSA: Bush SR-PCSS: Bush (old) PR-PCSS: Knob RIC-PCSA-N15: Pivot SC-PCSS: Cover clip lever ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.
PCSA Pag. 7 Rev.03 ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.