Smart Tweezers ™ Colibri ST-5S ™ LCR Meter and Component Identifier in a Pair of Tweezers An Efficient and Convenient Way to Test SMD Components • Built-in high-precision LCR probe • Convenient one-hand operation • Ideal for Surface Mount Devices • Automated component identification • Automated test range selection • Manual C, R, L, Z and ESR modes • Adjustable test signal levels • Swiss-made precise test leads • Diode Polarity/Short Testing • Secondary D, Q and ESR parameters • Portable and er
Wide Spectrum of Additional Functions • Smart Tweezers™ LCR meter allows you to test various component types, including secondary components of Dissipation Factor (D), Quality Factor (Q). This handheld also includes other functions that result in a more detailed component analysis. • The built-in Equivalent Series Resistance (ESR) mode helps you better understand the inherent resistance - behavior typically found in capacitors across selected frequencies.
Accuracy Specifications Resistance, impedance. Range 1Ω 10 Ω 100 Ω 1000 Ω 10 kΩ 100 kΩ 1000 kΩ 10 MΩ Resolution 0.001 Ω 0.01 Ω 0.01 Ω 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 100 Hz 0.7% + 0.7% + 0.2% + 0.2% + 0.2% + 0.5% + 0.5% + 2.0% + 1 kHz 0.7% + 0.7% + 0.2% + 0.2% + 0.2% + 0.5% + 0.5% + 2.0% + 50 8 3 3 3 5 5 8 10kHz 0.7% + 0.7% + 0.2% + 0.2% + 0.2% + 0.5% + 0.5% + 5.0% + 50 8 3 3 3 5 5 8 50 8 3 3 3 5 5 8 Accuracy for the ranges 1 R ~ 100 R is specified after subtract of the offset resistance.
