SDS

Twister® Wet Location Wire Connector

SDS#: ID016

Revision Date: June 13, 2018 Page 3 of 10

Indication of immediate medical attention and special treatment needed: If any symptoms

are observed, contact a physician and give them this SDS sheet. If exposed or concerned: Get

medical advice/attention.

SECTION 5: Fire-fighting measures

Suitable extinguishing media: None normally required. Use extinguishing media for

surrounding materials.

Unsuitable extinguishing media: None known.

Specific hazards arising from the chemical: None expected, but Polybutylene Terephthalate

is a UL listed 94 V-0 flame rated products.

Combustion products - Carbon monoxide, Carbon dioxide.

Special protective equipment and precautions for fire-fighters: For fire involving this

material, use self-contained breathing apparatus with full face shield to protect against the

hazardous effects of combustion products and oxygen deficiencies. Keep fire exposed

containers cool with water.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate

ventilation. For personal protection see section 8.

Methods and material for containment and cleaning up:

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Sweep up to

prevent tripping.

SECTION 7: Handling and Storage

Precautions for safe handling: Use good personal hygiene practices.

Conditions for safe storage, including any incompatibles: Keep away from children, infants

and pets. Avoid excessive heat or open flames.

SECTION 8: Exposure controls/personal protection

Control Parameters:

Occupational exposure limits:

US OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200):

Permissible Exposure Limits

Substance

PEL-TWA

(8 hour)

PEL-STEL

(15 min)

Silicone Compound

No data available