Specification

Twister® Wet Location Wire Connector
SDS#: ID016
Revision Date: June 2, 2015 Page 4 of 10
Zinc Dust
No data available
No data available
US ACGIH Threshold Limit Values
Substance
TLV-TWA
(8 hour)
TLV-STEL
(15 min)
Silicone Compound
No data available
No data available
Zinc Dust
No data available
No data available
NIOSH Exposure Limits
Substance
TWA
STEL
Silicone Compound
No data available
No data available
Zinc Dust
No data available
No data available
Appropriate engineering controls: None normally required. General (mechanical) room
ventilation is expected to be adequate.
Individual protection measures, such as personal protective equipment:
Eye/face protection: Follow company policy with respect to eye protection.
If used, safety glasses should be OSHA compliant.
Skin and Hand protection: None normally required.
Respiratory protection: None normally required. Where protection from nuisance levels
of dusts are desired, use type N95 (US) dust masks. Use respirators and components tested
and approved under appropriate government standards such as NIOSH/OSHA.
Other: None.
Thermal hazards: No data available.
SECTION 9: Physical and chemical properties
Appearance
Physical state: Solid
Form: Solid Wire Connector
Color: Various.
Odor: No data available
Odor threshold: No data available
pH: Not applicable
Melting point/freezing point: No data available
Initial boiling point and No data available
boiling range:
Flash point: No data available
Evaporation rate: No data available
Flammability (solid, gas): Not applicable
Upper/lower flammability or explosive limits