Installation Guide

410

Crimp Sleeve

Wire Connector

Warranty limited solely to repair or replacement;

no warranty of merchantability, fitness for a

particular purpose or consequential damages.

Pat. No. 2,810,897

IDEAL INDUSTRIES, INC.

Sycamore, IL 60178, U.S.A.

800-435-0705 Customer Assistance

www.idealindustries.com

I 9639-2 Made in U.S.A.

PAGE 1
410 Crimp Sleeve Wire Connector Warranty limited solely to repair or replacement; no warranty of merchantability, fitness for a particular purpose or consequential damages. Pat. No. 2,810,897 IDEAL INDUSTRIES, INC. Sycamore, IL 60178, U.S.A. 800-435-0705 Customer Assistance www.idealindustries.com I 9639-2 Made in U.S.A.
PAGE 2
To be sold only with installation instructions. Instructions Crimp with IDEAL Electrician’s Pliers, models 430 or 420; IDEAL Crimp Tool, model 425 (using small crimp die) or model 429 using “BARE” crimp die). Insulate with IDEAL model 415 WRAP-CAP®. Note: Always turn off power before installing or removing connectors. Listed as a PRESSURE-TYPE wire connector on the following solid and/or stranded wire combinations: COPPER TO COPPER ONLY (DO NOT USE ON ALUMINUM). 1. Strip 2” & 2.