Full Product Manual

www.idealind.com
31
Model Color Wire Combination Ranges Qty. Cat. No.
65 Purple
1 #10 Al solid w/1 or 2 #10 Cu solid
1 #10 Al w/1 or 2 #12 Cu
2 #10 Al solid w/1 #12 Cu
1 #10 Al w/1 or 2 #14 Cu
2 #10 Al solid w/1 #14 Cu
2 #12 Al solid w/1 #10 Cu
1 #12 Al solid w/1 or 2 #10 Cu
1 #12 Al stranded w/1 or 2 #10 Cu solid
1 #12 Al w/1 or 2 #12 Cu
2 #12 Al solid w/1 #12 Cu
1 #12 Al w/1 or 2 #14 Cu
2 #12 Al solid w/1 #14 Cu
1 #10 Al w/1 or 2 #18 Cu
2 #10 Al solid w/1 #18 Cu
1 #12 Al w/1 or 2 #16 Cu
2 #12 Al solid w/1 #16 Cu
1 #10 Al w/1 or 2 #16 Cu
2 #10 Al solid w/1 #16 Cu
1 #12 Al w/1 or 2 #18 Cu
2 #12 Al solid w/1 #18 Cu
Card of 2 30-065
Card of 10 30-765
Card of 25 30-165
Box of 100 30-265
Carton of 1,000 30-365
600V maximum building wire; 1,000V signs or light fixtures
Model Color
Wire Combination
Range (In.)
Wire Combination
Range (mm)
Qty. Cat. No.
60
®
Yellow
600V*
20 to 10 AWG
Min. 1 #20 w/1 #18
Max. 1 #10 & 2 #12
600V*
,5mm
2
to 6,0mm
2
Min. 1-,5mm
2
w/1 ,75mm
2
Max. 1-6,0mm
2
w/2-4,0mm
2
1,000/box 30-360Y
1,000V maximum fixtures and signs.
MudBug
®
Utility Wire Connectors
Twister
®
Al/Cu Wire Connectors
• Connects underground gas tracer
lines providing superior protection
• Moisture and corrosion resistant,
pre-filled with non-hardening,
100% silicone
• 20 - 10 AWG wire range capacity
• UL Listed to direct burial test
standard 486D up to 600V
maximum voltage
• Only aluminum-to-copper twist-on connector specifically designed to guarantee a secure connection
while preventing aluminum corrosion
• Specially formulated corrosion-resistant compound penetrates corrosion build-up on aluminum
conductors for increased conductivity and cooler connections
• Compact, one-piece design features ribbed cap, swept wings and hexagonal head for easy installation
by hand or with standard nutdriver
• Live-action, square-wire spring expands and contracts with aluminum wire
• Deep skirt provides maximum dielectric strength
• Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
• Comply with N.E.C. Section #110-14(b) for aluminum-to-copper connections; UL Listed to
486C and CSA Certified to C22.2 #188; complies with Federal Specification W-S-610E
• UL Listed to 467 for grounding and bonding
WARNING:
1. One time use only. Do not reuse connector.
2. Do not use on aluminum to aluminum wire combinations
3. Wiring must comply with all applicable electrical codes.
Wire Connector
also listed as
grounding equipment