Full Product Manual

S-Class
®
Non-Conductive
Eyelet
24
Fuse Puller & Test Light
Fuse Puller Cross Reference
Safe-T-Grip
®
Fuse Pullers
• Maximum efficiency and convenience for removing or
replacing cartridge-type fuses
• Three sizes handle fuses ranging from 0 to 600A
• Fully insulated, high-dielectric, glass-filled
polypropylene construction
• Notched handles provide safe, no-slip grip
• Clearly marked amperage ranges
• Exceed MIL specifications
• Non-conductive and non-arcing
• Rectilinear profile superior for greater
pushing power
• Designed for use around live circuits
• Pulling Strength 350 lbs.
• Convenient pocket-sized tool safely
pulls cartridge fuses and checks
electrical connections
• Test prods fit parallel and tandem
slot receptacles
• Built-in resistors limit current flow
to help eliminate false indication
• For 9/16 in. to 1 in. fuses; for use
on fuses to 100A/250V and 60A/600V
• Test capacity from 100V to 600V AC/DC
Description Cat. No.
Fuse Puller & Test Light
34-012
Description Cat. No.
Small Puller for 250V, 9/32 in. to 1/2 in.
dia. fuses; 5 in. long
34-001
Medium Puller for 0 to 100A/250V & 600V,
1/2 in. to 1 in. dia. fuses; 7-1/2 in. long
34-002
Large Puller for 31 to 600A/250V &
31 to 400A/600V, 3/4 in. to 2-1/2 in.
dia. fuses; 11-3/4 in. long
34-003
Fuse Size Current Voltage IDEAL Bussmann Littlefuse
Ferrule Type Amps Volt a.c.
1/4 x 1-1/4 1/500 to 30 250 34-015 FP-A3 97023
13/32 x 1-1/2 1/10 to 30 250 34-001, 34-015 FP-2 MFP
9/16 x 2 1/10 to 30 250 34-002, 34-012, 34-016 FP-2 LPFP
13/16 x 3 35 to 60 250 34-016, 34-003, 34-012 FP-2 LPFP
Knife Blade Amps Volt a.c.
1 x 5-7/8 70 to 100 250 34-012, 34-002, 34-016 FP-3 LPFP
1-1/2 x 7-1/8 110 to 200 250 34-003 FP-3 LPFP
2 x 8-5/8 225 to 400 250 34-003 FP-4 GFP
2-1/2 x 10-3/8 450 to 600 250 34-003 FP-4 GFP
Ferrule Type Amps Volt a.c.
13/32 x 1-1/2 1/10 to 30 600 34-001, 34-012, 34-016 FP-2 MFP
3/4 x 5 1/10 to 30 600 34-002 FP-2 MFP
1 x 5-1/2 35 to 60 600 34-012, 34-002, 34-016 FP-3 MFP
Knife Blade Amps Volt a.c.
1-1/4 x 7-1/8 70 to 100 600 34-003 FP-3 LPFP
1-3/4 x 9-5/8 110 to 200 600 34-003 FP-4 LPFP
2-1/2 x 11-5/8 225 to 400 600 34-003 FP-4 LPFP
3 x 13-3/8 450 to 600 600 NONE NONE NONE
Fuse Pullers
• Molded of tough, high-impact nylon for greater strength
• No-slip gripping surface and protective finger stops for
added safety
Description Cat. No.
Small Puller for 0 to 30A/250V,
1/4 in. to 1/2 in. dia. fuses; 5 in. long
34-015
Large Puller for 0 to 100A/250V &
0 to 60A/600V, 9/16 in. to 1 in.
dia. fuses; 7-1/4 in. long
34-016
Volt-Guard Fish
Tapes
Length
Width &
Thickness
Case
Dia.
End
Type
Tuff-Grip™ Pro
Case
Repl.
Tapes
Fiberglass
60 ft.
.1875 in. x .094 in. 12 in. Eyelet
31-542 31-552
120 ft. 31-544 31-554
S-Class
®
Fish Tapes
• Non-conductive tape for
use around live circuits
• Strong S-Class
®
core for
longer life and greater
pushing power
• Designed for use
around live circuits
• Pulling strength 500 lbs.
Length
Width &
Thickness
Case
Dia.
End Type
Tuff-Grip™
Pro Case
Rapid-Pak
®
Repl.
Tapes
S-Class
®
Nylon Jacketed Fiberglass
50 ft.
3/16 in.
dia.
12 in.
Leader 31-060 31-187 31-150
50 ft.
Metal Eyelet
31-062 31-190 31-160
50 ft.
Non-Conductive Eyelet
31-086 — 31-200
100 ft. Leader 31-061 31-186 31-152
100 ft.
Metal Eyelet
31-063 31-189 31-162
100 ft.
Non-Conductive Eyelet
31-087 — 31-201
200 ft.
16 in.
Leader 31-064 31-207 31-155
200 ft. Metal Eyelet 31-065 31-208 31-165
200 ft.
Non-Conductive Eyelet
31-088 — 31-202
Tuff-Grip™ Pro Case w/
SpeedGrip™ Handle
Tuff-Grip™ Pro Case
w/SpeedGrip™ Handle
Rapid-Pak
®
Case w/
Speed Winder Knob
Volt-Guard
Non-Conductive
Eyelet
S-Class
®
Strength Steel
Eyelet
S-Class
®
High
Omni-directional
Leader
Safety, Health & Environment