Use and Care Guide

Heat Shrink
www.idealindustries.com 1-800-435-0705 for Customer Service
D-12
■ Direct burial rated, underground splice kits
■ Heavy-wall heat shrink tubing with
adhesive liner provides complete
insulation and protection
■ Connector can be used
for aluminum and/or
copper cable
■ Meets the requirements of
the 2005 NEC Code 110-14(B)
■ 600V maximum, 105°C rating
■ UL Listed
■ Provides a fully-insulated
butt splice
■ 600V Maximum, 105°C rating
Thermo-Shrink
®
Al/Cu Splice Kits
Thermo-Shrink
®
Copper Butt Splice Kits
Description Cat. No.
Underground Splice Kit – 8 to 4 AWG, Tubing 3/4 in. x 6 in. 46-401
Underground Splice Kit – 4 AWG to 1/0, Tubing 1.1 in. x 8 in. 46-402
Underground Splice Kit – 1/0 to 250 KCMIL, Tubing 1-1/2 in. x 12 in. 46-403
Description Cat. No.
Butt Splice Kit – Copper 14-8 AWG 46-404
Butt Splice Kit – Copper 8-2 AWG 46-405
Heat Shrinkable Tubing
■ Self-igniting trigger, starts fast and easy
■ Fully adjustable regulator valve and
air inlet port to achieve the ideal
flame setting
■ 1 in. wide brass burn-tip
accommodates a variety of heat
shrink applications
■ Heavy duty, stainless steel burn
tube, combined with a cast
aluminum body with epoxy finish,
creates a durable long lasting tool
for almost any environment
■ 1 - 20 threads screw directly onto
14 oz. and 16 oz. propane gas tanks
Thermo-Shrink
®
Torch
Description Cat. No.
Heat Shrink Torch 46-420
Thermo-Shrink
®
UF Splice Kits
Description Cat. No.
UF Splice Kit - 14-8 AWG, Tubing 1.1 in. x 8 in. 46-400
UF Stretcher Kit* - 14-8 AWG, Tubing 1.1 in. x 18 in. 46-410
*Stretcher kit connector is 11.5 in.
■ Fully waterproof, submersible and
re-enterable to make future
changes or repairs
■ Meets the requirements of
the 2002 NEC Code 110-14 (b)
and UL486D
■ Accommodates 14 to 10 AWG
wire range
■ 600V Maximum, 105°C rating
Thermo-Shrink
®
Self-Sealing
UF Splice Kit
Description Cat. No.
Self Sealing UF Splice Kit 46-411
E123896
E123896
■ Direct burial rated
■ 14/3 with and without ground
thru 8/3 without ground, UF
cable range
■ Stretcher kit repairs a 7 in. to 10” in.
section damaged or destroyed by
a trencher.
■ 600V Maximum, 105°C rating
■ Meets the requirements of the 2002
NEC Code 110-14(b) and UL486D