Full Product Manual

Page 28
Maintenance
Clean the case with a damp cloth and mild detergent. Do not use abrasives or solvents. Keep
away from liquids and ensure the tracer is completely dry before use.
Service and Replacement Parts
This unit has no user-serviceable parts except for the fuse in the transmitter. For replacement
parts or to inquire about service, contact IDEAL Technical Support at
877-201-9005 or visit our website, www.idealind.com.
Specifications:
Transmitter
Operating Frequency: 32.768 kHz, fixed-amplitude, time-modulated signal
Current Output of Signal: 82 mA rms to 50 Ohms
Voltage Output of Signal: 4V rms (330 mW)
Operating Voltage: 0 – 480V AC/DC TR-946 or 0-600V AC/DC TR-948
Fuse: 0.5 amp 600V Fast Acting Ceramic Fuse 6.35 x 31.8mm
Battery Power: 1.5V x (6) AA batteries (NEDA 15A, IEC LR6)
Battery life: 20 hours open circuit testing / 6 hours short circuit tracing.
Indicators: On/Off, Line energized, Low battery
Receiver
Sensing: Magnetic
Signal response: Numeric display and Audible beep
Battery Power: 1.5V x (4) AA batteries (NEDA 15A, IEC LR6)
Battery life: 20 hours minimum
CAUTION: The transmitter is designed to work on 0-480 volts DC and 50 or 60 hertz AC
(TR-946) or 0-600 volts DC and 50 or 60 hertz AC (TR-948). Signals other than these such
as VFD output, speaker drivers, PWN signals are NOT compatible with the transmitter and may
damage it.
Circuit Tracer Kits
Operating Temperature: 32°F (0°C) to 122°F (50°C)
Storage Temperature: -4°F (-20°C) to 140°F (60°C) (without batteries installed).
Humidity (Operating): 95% R.H. max
Dimensions (W x H x D) TR-946, -948: 7.5 x 3.0 x 2.25 in. (195 x 75 x 58 mm)
RC-946, -948: 8.75 x 2.375 x 1.25 in. (225 x 60 x 34 mm)
Weight: 61-946, -948: 4.5 lbs. (2.1 kg)
Accessories Included: Receiver, Transmitter, test lead kit, soft case or hard case, batteries,
instruction manual.
Operating Altitude: 6562 ft.
Specifications subject to change.