Installation Guide

STEP 1: ATTACHING
ALLIGATOR CLIPS TO
LIVE 3-PHASE SYSTEMS
STEP 2: PLUG LEADS
INTO TRANSMITTER AND
TURN IT ON
STEP 3: TURN ON
RECEIVER AND TRACE
Trace conductors or identify breakers or fuses
by using previously described methods.
Adjust sensitivity
as required to
optimize received
signal strength.
Proper orientation
of the receiver is
important and may
require adjustment
to maximize
displayed signal
strength.
Using appropriate safety methods, attach
the alligator clips with 3 ft. leads to any
two of the three phases. (ensure leads are
not plugged into the transmitter)
Next, plug opposite ends of leads into the
transmitter starting with the black lead
first.
Next, Turn on Transmitter
Note: The circuit in these pictures has been de-energized and locked out in accordance with NFPA 70E.
3-PHASE BREAKER, FUSE, CONDUCTOR
FIND IT