Installation Guide

ManualsBrandsIDEAL ManualsElectricalSureTrace Digital Circuit Tracer 0-Volt to 480-V AC/DC

61-946

SureTrace™ Circuit Tracer 0-480V AC/DC

61-948

SureTrace™ Plus Circuit Tracer 0-600V AC/DC

Transmitter*

• CAT III 480V, Range 0-480V AC/DC

• Indicators: Power, Energized Circuit, CertainCircuit™, Battery Level

• Kickstand

• Magnetic Hanging Strap Clip (sold separately, UMHS-757)

• CAT III 600V, Range 0-600V AC/DC

• Indicators: AC/DC Voltage and DC Polarity, Power, Energized Circuit, Battery Level

• Voltage Level Indicator and Continuity Test

• Kickstand

• Magnetic Hanging Strap Clip (sold separately, UMHS-757)

Receiver

• Single LED Screen with Backlight

• Displays: Signal Strength,Sensitivity Level, Energized Circuit, CertainCircuit™,

Peak Signal Strength and Battery Level

• Functions: Sensitivity Setting, Mute, Backlight, On/Off

• Dual High Visibility Displays, Patented 180° Main and TightSight

Secondary

Displays

• Displays: Signal Strength, Sensitivity Level, Energized Circuit, Peak Signal, EF

and NCV (when in NCV Mode) and Battery Level

• Functions: Sensitivity Setting, Mute, NCV, On/Off

• Flashlight for use in Poor Lighting Conditions

Leads/

Accessories

• (1) Outlet Plug Adapter (Hot and Neutral only)

• (2) Blade Prongs, Hot and Neutral (one pair)

• (1) Ground Prong

• (2) Alligator Clips

• (2) 3’ Lead Adapters

Case

• Padded Nylon Pouch w/Handle

• Transmitter & Receiver Retained by Straps

• Side Panel Pockets for Battery Storage

• Large Pocket for Lead/ Accessory Storage

• Molded Hard Case with handle and Metal Clips

• Slots for Transmitter, Receiver and Clamp

• Side Slot for Battery Storage

• Large Slots Lead/Accessory Storage

SURETRACE™ KIT OPTIONS

IMPORTANT: This tracer is intended for use by qualified electricians. Follow NFPA 70E Standard for Electrical Safety

in the Workplace when using this tester. Always consult the instruction manual provided with the tester for operational

limitations and procedures associated with a specific tester.

*The transmitter is to be used only on DC, or 50 or 60 Hz AC energized lines.

Output from VFD’s, shipboard voltage inverters or dimmers will damage the unit.

TR-946

TR-948

RC-946

TL-956

C-946 C-950

Residential

Commercial

Industrial

Form No. P-5516

4/24

Printed in U.S.A.

IDEAL Electrical™

1800 S. Prairie Drive, Sycamore, IL 60178, USA / 815-895-5181 • 800-435-0705 in USA

480V 600V

N12966

RC-948

Voltage Level Indicator

Continuity Test