Luftreiniger DE Betriebsanleitung EN Operating Instructions FR Mode d´emploi IDEAL AP30 PRO IDEAL AP40 PRO www.ideal.
Table of Contents EN Operating Instructions (24 – 45) Intended use Important safety instructions Product features Included in the box Unpacking and setting up Operation Startup / Fan speeds Operation Display Air quality indicator Filter replacement indicator 25 25 27 27 28 30 31 31 31 only IDEAL AP40 PRO: Remote control (replacing the battery) Remote control (function) 33 34 App Control WLAN Cleaning and maintenance Accessories Troubleshooting Technical data 37 37 38 38 39 42 24
Important safety instructions Introduction Thank you for choosing a device from IDEAL. Intended use • The device is used exclusively for cleaning the ambient air indoors. • Please read these operating instructions before starting to use the device and please follow the safety instructions. The operating instructions must be kept available with the device at all times. Important safety instructions Read and save these instructions: to persons associated with use of the appliance. Only use the device indoors.
Important safety instructions Important safety instructions • Children being supervised not to play with the appliance. • Do not block the air intake and outlet. technical parameters. Improper usage may pose a threat to life and health. • Disconnect the mains plug prior to any cleaning or maintenance work. • Do not use any solvents. These could damage the housing surface. • Do not use any substances containing silicone, since this could destroy the air quality sensor.
Product features / Included in the box Product features • Filter replacement indicator: (EASY touch) which flashes orange. • • • Included in the box (Unit head) Filter cartridge Luftre inige r DE B etr ie bsa nleitung EN Oper ating Ins truc tions FR Mode d´e mploi Remote control • With 3V lithium battery (only IDEAL AP40 PRO) IDEAL AP30 PRO IDEAL AP40 PRO www.id eal.
Unpacking and setting up Installation guidelines for optimum performance: • Place the device at least 10 cm away from the wall. • Keep the device away from areas subjected to draft (wind). • Make sure that furniture, fabrics or other objects do not come in contact with the air intake/outlet or block them. Remove power cable (1.), operating instructions (2.), remote control (3. only IDEAL AP40 PRO) and textile cover (4. only IDEAL AP40 PRO). unpack.
Unpacking and setting up Take the textile cover (only IDEAL AP40 PRO) component A). A A tabs into the three recesses provided for this and lock it at the locking component (A) . B then to the socket.
Operation Startup / Fan speeds B 1. Plug in the power cable, press the switch button (B automatic mode . The switch button lights up. 2. Press the switch button to exit automatic fan speed 1 . The switch button flashes once. 3. Press again to increase the fan speed to 2 . The switch button flashes twice. Press again to increase the fan speed to 3 (flashes 3 times) or to the turbofan speed T (flashes 4 times). 4. If you press the switch button again, the air . The switch button lights up, but only dimly.
Operation / Display Display B Air quality indicator The air quality is displayed in 3 colours (in all fan speeds): Switch button (B) green: Switch button yellow: Switch button red: good air quality average air quality poor air quality Filter replacement indicator The switch button (B intervals). 1 year (depending on operation and sooner.
Remote control (only IDEAL AP40 PRO) Battery usage • Always use 3V lithium batteries CR2025 for the remote control. • If the remote control is not going to be used for a long time, please remove the battery. Unsuitable location • Make sure that no objects or furnishings are situated between the remote control and the • Do not store the remote control in direct sunlight and/or close to radiators/heaters. The remote control has a pre-installed lithium battery CR2025.
Remote control (only IDEAL AP40 PRO) Replacing the battery • Open the battery compartment by pressing (A) and pulling out (B) at the same time. B A C • Insert a new battery into the battery compartment, making sure the polarity is correct (+ / -). • Always use 3V lithium batteries CR2025. • Slide the battery compartment back into its seating (C). Important information about the batteries and how to dispose of them Batteries must NOT be disposed of with household waste.
Remote control (only IDEAL AP40 PRO) C On/off button D Quiet button B Automatic button Turbo A Fan speed buttons 8h Auto 3 4h 2 2h 1 1h F Locking button Function A: Select the required fan speed . B: . C . D: E: . Select the required timer time . Visualisation only in the app (smartphone / tablet). F: Press the locking button again to unlock. Note: locking function is activated, it lights up briefly in red.
Filter replacement Filter replacement Note: Take the mains plug out of the socket. mains plug out of the device. A component (A) and remove. Remove the textile cover (only IDEAL AP40 PRO). cartridge.
Filter replacement Put the textile cover (only IDEAL AP40 PRO) A back (locking component A). A tabs into the three recesses provided for this and lock it at the locking component (A) . then to the socket. installed correctly.
App Control / WLAN App Control smartphone / tablet (iOS /Android). WLAN Querying the WLAN status: Press the WLAN button the WLAN is enabled when the switch button flashes blue the WLAN is disabled when the switch button flashes white. Enabling/disabling WLAN Press the WLAN button and while the switch button is flashing (blue or white), press the WLAN button again to enable or disable the WLAN.
Cleaning and maintenance / Accessories Cleaning and maintenance • Do not use any solvents. These could damage the housing surface. • Do not use any substances containing silicone, since this could destroy the air quality sensor. • Do not test the effectiveness of the air quality sensor with high quantities of gas, or alcohol, since this could destroy the air quality sensor. • Clean the textile cover with a vacuum cleaner.
Troubleshooting Is the power cable securely connected to the back of the device? Make sure that the power cable is not damaged in any way Check both ends of the power cable. Make sure that these are plugged in and that the (page 29). inserted correctly? cartridge is inserted. in place with all 3 tabs and is fully locked (page 29). working. The buttons on the remote control do not work. (only IDEAL AP40 PRO).
Troubleshooting The switch button is lit up only dimly or not lit up at all. switch button (page 30). If you press the switch button once, the air Disable the Quiet function by selecting a different fan speed via the app or on the remote control (only IDEAL AP40 PRO). Automatic mode is not working properly. switch it on and after disconnecting it from the mains.
Troubleshooting surface? Place the device on an even surface. speed? Use the switch button to set a lower fan speed. Service with your problem? Contact: Service • www.krug-priester.com • service@krug-priester.
Technical data IDEAL AP30 PRO: Power supply 200-240V 50/60Hz / 100-120V 50/60Hz Power consumption 30W (200-240V) / 25W (100-120V) Suitable for rooms 20 to 40 m² * Air flow rate (max.) 310 m³/h Dimensions (L × W × H) 298 × 255 × 398 mm Weight Volume at turbofan speed Volume in Quiet mode 3,6 kg 54,2 dB(A) (max.) 16,7 dB(A) (min.
The company Krug + Priester has the • Quality management system according to DIN EN ISO 9001:2015 • Environmental management system according to DIN EN ISO 14001:2015 • Energy management system according to DIN EN ISO 50001:2018 Terms of warranty IDEAL provides a warranty for this device from the date of purchase. • If a material or design defect occurs during the warranty period, IDEAL shall repair or replace the device, or repay the purchase price, at its discretion.
This machine is GS-tested and conforms to the following EC guidelines: • 2014/35/EU for electrical safety • 2014/30/EU for electromagnetic compatibility. • 2011/65/EU, 2015/863/EU RoHS. machine. Subject to technical changes. EC-declaration of conformity - Herewith we declare that GS-IDENT. No. UL-IDENT. No.
Supplier‘s Declara on of Conformity 47 CFR § 2.1077 Compliance Informa on This device complies with part 15 of the FCC Rules. Opera on is subject to the following two condi ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera on. Manufacturer: KRUG + PRIESTER GMBH & CO KG Simon-Schweitzer-Straße 34 72336 Balingen, Germany U.S.
@ideal_luftreiniger Krug & Priester GmbH & Co. KG Simon-Schweitzer-Str. 34 D-72336 Balingen (Germany) www.krug-priester.com @idealluftreiniger 9700282 02-2018 09.02.