Use and Care Guide

1-800-435-0705 for Customer Service www.idealindustries.com
B-13
Conduit Benders
1-800-435-0705 for Customer Service www.idealindustries.com
Wire Installation
■ Rugged, steel construction for long-term durability
■ Baked-on blue enamel finish resists corrosion and enhances visibility
■ Convenient bending guide for offset bends
Handles for Benders
Bender & Handle
Conduit Type and Size Cat. No.
1/2 in. EMT 74-026
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-027
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-028
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-034
Bender Only
Conduit Type and Size Cat. No.
1/2 in. EMT 74-001
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-002
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-003
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-006
■ Exceptional, durable, materials for extra strength
■ Reinforced at stress points for longer life
■ Markings are raised and cast into the bender body on both sides for easy visibility
■ Deeply serrated step helps prevent slippage when applying force
■ Grooved internal hook surface helps prevent conduit from slipping
■ Flat hook surface provides stable starting point
■ Desirable Benfield bending system
Ductile Iron
■ Withstands a lifetime
of heavy use
■ Ductile iron material is
stronger than
malleable iron
■ Lightweight aluminum
for easy handling
■ Strong enough for
every day use
Aluminum
Conduit Benders
Bender & Handle
Conduit Type and Size Cat. No.
1/2 in. EMT 74-046
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-047
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-048
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-035
Conduit Handle Only
Type and Size Cat. No.
1/2 in. EMT 74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-021
Bender Only
Conduit Type and Size Cat. No.
1/2 in. EMT 74-031
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-032
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-033
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-036
Ductile
Conduit Handle Only
Type and Size Cat. No.
1/2 in. EMT 74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-021
Aluminum