Operating Guide

F-Compression Connectors
The NJX™ (pronounced “injects”) compression connector offers a high performing, reliable and economical
solution designed for applications that do not require weatherproof connectivity. NJX™ is also great for installers
looking to upgrade from traditional hex crimp or twist-on coax F termination methods.
Available in F-Type interfaces for RG-6 and RG-6 Quad cables, the NJX™ connectors are an indoor cable specific
alternate to the OmniConn™ series of products. NJX™ connectors require the same 1/4” x 1/4” cable preparation
and compression termination as all other IDEAL compression connectors. Color coded, injection molded bodies
make these connectors lighter, more compact, and more cost effective for installers. Unlike traditional compression
connectors that get shorter when compressed, the NJX™ series connectors have a post-forward design, which
during compression, is “injected” into the body of the connector. Although these connectors are shorter, they still
utilize the same compression settings and stroke length as all IDEAL F-compression connectors. Once compressed,
the cable is secured creating a permanent 360° compression ring on the cable. NJX™ connectors are designed
for applications from 5MHz to 3GHz including CATV and satellite. For outdoor/weatherproof or universal cable
compression products, the RTQ™ series of compression products are recommended.
OmniConn™ RG-6 (blue) and RG-6 Quad (black) compression connectors are
an economical, cable specific alternate to the RTQ™ series of products. Featuring
a weatherproof back seal and front end O-ring to inhibit moisture migration, these
are rated for indoor or outdoor use. The two piece brass and plastic body comes
pre-assembled for quick field termination and installation. Utilizing the same style
patented adapter sleeve as the RTQ™ series, OmniConn™ connectors exceed
>40 lbs. of pull force, making your connection permanent. For use in
applications from 5MHz to 3GHz.
NJX™ F-Compression Connectors
OmniConn™ F-Compression Connectors
TLC™ Tool-Less Compression Connectors
NJX™ RG-6
OmniConn™ RG-6 OmniConn™ RG-6 Quad
NJX™
RG-6 Quad
Black molded body
Post forward
design
7/16” hex nut
Post forward
design
Blue molded body
7/16” hex nut
The TLC™ (Tool-Less Compression) RG-6 and RG-6 Quad F compression connectors are
our simplest, fastest and lowest total cost solution for installing compression connectors.
Designed to save the installer Time, Labor, and Cost when installing indoor RG-6 F-Type
connections no compression tool is required to terminate these connectors.
The TLC™ connector is an indoor, cable specific alternate to the NJX™ series of products. The TLC™ connector uses the standard 1/4” x 1/4” cable
preparation, that does not require a compression tool to complete the termination process. TLC™ series connectors feature a sliding post design to capture
and secure the cable inside of the connector. After the cable is inserted, tightening the connector to the device completes assembly process, creating a
360° compression point and a permanent connection. IDEAL F/BNC insertion tool (35-046) can be used (but are not required) when installing the TLC™
cable assembly to ensure connectors are properly torqued and fully seated to the female barrel. These connectors are designed for applications from 5MHz
to 3GHz including CATV and satellite.
TLC™ RG-6
TLC™ RG-6Q
Grey molded body
Purple molded body
Sliding post
design
7/16” hex nut
7/16” hex nut