User Guide

AC VOLTAGE
Meter Setup: Circuit Connection:
Function Range Resolution Accuracy
AC Voltage 200.0 mV .1 mV
2000 mV 1mV 50 to 500Hz
20.00 V .01 V
≤ 20 V range ±(1% +4)
200.0 V .1 V ≤ V range ±(1.5% +4)
600 V 1 V
To Measure DC Voltage
1. Plug the test leads into meter inputs as indicated in the dia-
gram on the next page.
2. Select the proper range to be used within the VDC area.
4. Connect the meter in parallel with the load or circuit.
5. Measure DC voltage.
DC VOLTS
Meter Setup: Circuit Connection:
Page 4Page 3
WARNING! (cont.)
7. Before breaking a circuit for testing, turn off the power to
the circuit. When disconnecting from a circuit, discon-
nect the hot lead first, then the common lead.
8. Disconnect the meter from the circuit before turning off
any indicator, including motors, transformers,and sole-
noids.
Overload Protection
V
AC
+ V
DC
200mV range 500VDC/350VAC
for 15 sec
>200mV range 600VDC/600VAC
A
AC
+ A
DC
mA input 0.5A/250V
10A input 10A/600V
Ohms (Ω) 500VDC/500VAC
Diode 500VDC/500VAC
Continuity 500VDC/500VAC
Unit of Measure Multipliers
For your reference, the following symbols are often used to
make measurement easier:
Symbol Verbal Multiplier
M mega X1,000,000
K kilo X1,000
m milli ÷1,000
µ micro ÷1,000,000
To Measure AC Voltage:
1. Plug the test leads into the meter inputs as indicated in
the diagram below.
2. Select the proper range to be used within the VAC area.
3. Connect the meter in parallel with the load or circuit.
4. Measure AC voltage.
Red
Black
Red
Black
ND 1075-1 61-360 Instructions 3/9/06 4:51 PM Page 3