SDS

Material Safety Data Sheet
Report No.:STR14109087S Page 5 of 10
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
immediately.
Methods and materials for cleaning up Absorb spilled material with an inert absorbent
(dry sand or earth). Scoop contaminated
absorbent into an acceptable waste container.
Collect all contaminated absorbent and dispose
of according to directions in Section 13. Scrub
the area with detergent and water; collect all
contaminated wash water for proper disposal.
Section 7 – Handling and Storage
Handling Do not dismantle, open or shred secondary
Alkaline Battery;
Don’t handling Alkaline Battery with metalwork.
Do not open, dissemble, crush or burn battery.
Ensure good ventilation/ exhaustion at the
workplace.
Prevent formation of dust.
Information about protection against explosions
and fires: Keep ignition sources away- Do not
smoke.
Storage If the Alkaline Battery is subject to storage for
such a long term as more than 3 months, it is
recommended to recharge the Alkaline Battery
periodically.
3 months: -10℃~+40℃, 45 to 85%RH
And recommended at 0℃~+35℃ for long period
storage.
The capacity recovery rate in the delivery state
(50% capacity of fully charged) after storage is
assumed to be 80% or more.
The voltage for a long time storage shall be
1.5V~2.5V range.
Do not storage Alkaline Battery haphazardly in a
box or drawer where they may short-circuit each
other or be short-circuited by other metal
objects.
Keep out of reach of children.
Do not expose Alkaline Battery to heat or fire.
Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic
materials.