Datasheet

www.apem-idec.eu
D-032
ø22 XW Series Emergency Stop Switches (Mechanical Indicator)
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Emergency Stop Switches
X6
XA
XW
XN
SEMI
High level of safety with Safe Break Action. Mechanical indicator on the operator body shows the
contact status - green when NC contacts are closed - reducing the maintenance work.
• IDEC’s original “Safe Break Action” and “Reverse Energy Structure”
ensure the safety of operator and system, when the switch is dam-
aged due to excessive shocks.
• The mechanical indicator on the operator body shows the normal/
latched status (green: normal). Reduces maintenance work and
improves operation efciency.
• Illuminated model also available (same size as non-illuminated)
• The depth behind the panel is only 46.4 mm (w/terminal cover).
• 1 to 4NC main contacts and 1 or 2NO monitor contact
• Push-to-lock, Pull or Turn-to-reset operator
• Direct opening action mechanism
(IEC 60947-5-5, 5.2, IEC 60947-5-1, Annex K)
• Safety lock mechanism (IEC 60947-5-5, 6.2)
• Degree of protection: IP65 (IEC 60529)
• Durable, silver with gold contacts.
• Finger-safe structure (IP20)
• UL NISD category
Contact Ratings
(NC main contacts/NO monitor contact)
Rated Insulation
Voltage (Ui)
Screw Terminal 250V
Rated Thermal Current (Ith) 5A
Rated Operating Voltage (Ue) 30V 125V 250V
Rated Operating Current
Main
Contacts
AC
50/60 Hz
Resistive Load (AC-12) – 5A 3A
Inductive Load (AC-15) – 3A 1.5A
DC
Resistive Load (DC-12) 2A 0.4A 0.2A
Inductive Load (DC-13) 1A 0.22A 0.1A
Monitor
Contacts
AC
50/60 Hz
Resistive Load (AC-12) – 1.2A 0.6A
Inductive Load (AC-14) – 0.6A 0.3A
DC
Resistive Load (DC-12) 2A 0.4A 0.2A
Inductive Load (DC-13) 1A 0.22A 0.1A
• Minimum applicable load: 5V AC/DC, 1 mA (reference value)
(Operating area depends on the operating conditions and load types.)
• The rated operating currents are measured at resistive/inductive load types
specied in JIS C8201-5-1.
Illumination Ratings
Rated Voltage Operating Voltage Rated Current
24V AC/DC 24V AC/DC ±10% 15 mA
Note: An LED lamp is built into the contact block and cannot be replaced.
Specifications
Applicable Standards
IEC60947-5-5, EN60947-5-5
JIS C8201-5-1, UL508, UL991, NFPA79, EN418
CSA C22.2 No. 14, GB14048.5
Operating Temperature
Non-illuminated: –25 to +60°C (no freezing)
LED illuminated: –25 to +55°C (no freezing)
Storage Temperature –45 to +80°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Operating Force
Push to lock: 32N
Pull to reset: 21N
Turn to reset: 0.27 N·m
Minimum Force Required
for Direct Opening Action
80N
Minimum Operator Stroke
Required for Direct
Opening Action
4.0 mm
Maximum Operator Stroke 4.5 mm
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance 100 MΩ minimum (500V DC megger)
Overvoltage Category II
Impulse Withstand
Voltage
2.5 kV
Pollution Degree 3
Operation Frequency 900 operations/hour
Shock Resistance
Operating extremes: 150 m/s
2
Damage limits: 1000 m/s
2
Vibration Resistance
Operating extremes:10 to 500 Hz, amplitude 0.35 mm,
acceleration 50 m/s
2
Damage limits: 10 to 500 Hz, amplitude 0.35 mm, acceleration
50 m/s
2
Mechanical Life 250,000 operations minimum
Electrical Life
100,000 operations minimum
250,000 operations minimum
(24V AC/DC, 100 mA)
Degree of Protection
Panel front: IP65 (IEC 60529)
Terminal Protection: IP20 (screw terminal, when using
XW9Z-VL2MF)
Short-circuit Protection
250V/10A fuse
(Type aM, IEC60269-1/IEC60269-2)
Conditional Short-circuit
Current
1000A
Terminal Style M3 screw terminal
Recommended
Tightening Torque for
Locking Ring
2.0 N·m
Connectable Wire
0.75 to 1.25 mm
2
(AWG18 to 16)
Recommended Tightening
Torque for Terminal Screw
0.6 to 1.0 N·m
Standards and Specications
Mechanical Indicator – the operator
body of the switch is green when the
contacts are closed, the green is hid-
den when the switch is actuated.
NC contacts ON
(button not pressed)
NC contacts OFF
(button latched)