Datasheet

www.apem-idec.eu
D-063
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Emergency Stop Switches
X6
XA
XW
XN
SEMI
ø30 XN Series Emergency Stop Switches Accessories
Accessories and Replacement Parts (for ø30 XN Series Emergency Stop Switches)
Name & Shape Material Part No.
Package
Quantity
Remarks
PPE XW9Z-VL2M 2
• Black
• Used for screw terminals.
• Attached to IP20 protection cover units.
Polyamide XW9Z-VL2MF 2
• Black
• Used to change terminal cover to IP20
ngersafe terminal.
• Only solid wires can be used. Once installed, IP20 terminal cover
cannot be removed.
Brass XN9Z-T1 1
• Used to tighten the locking ring when installing the XN emergency
stop switch onto a panel.
Steel
Trivalent chromate plating
TWST-T1 1
• Used to tighten the locking ring when installing the XN emergency
stop switch onto a panel.
• The XN series emergency stop switches are supplied with either terminal cover or IP20 ngersafe terminal cover.
• Padlocks and hasps are not supplied and must be ordered separately.
Nameplates (for ø30 Emergency Stop Switches)
Description & Shape Legend Part No.
Package
Quantity
Dimensions (mm)
(blank) HNAV-0
1
Polyamide
Mounting panel thickness
XN4E-¨L4: 1.0 to 4.5 mm
XN¨E-¨V4: 1.0 to3.5 mm
EMERGENCY STOP HNAV-27
Plate color: Yellow (Munsell 2.5Y 8/10 or equivalent), Legend: Black
Padlock and Hasp
Recommended Hasp
Maker Part No.
PANDUIT CORP.
PSL-HD3
PSL-1A
Master Lock
®
Company LLC
420, 421
b a
c
d
Use only padlocks or hasps that satisfy the specifications shown on the
left. The maximum total weight for padlocks and hasps is 1500g.
Make sure that the total weight does not exceed 1500g, otherwise the
XN emergency stop switch may be damaged.
Make sure that locking and unlocking of the padlock and hasp do not
interfere with other devices.
Padlocks and hasps are available from the following manufacturers.
Manufacturer URL
PANDUIT CORP. http://www.panduit.com/
Master Lock
®
Company LLC http://www.masterlock.com/
Padlocks and hasps of the following specifications can be used with
padlockable emergency stop switches.
Padlock Size
a b c d
7 mm maximum 19 mm minimum 39 mm minimum
15 mm minimum
(Note)
Note: When the padlock is installed from the side of the bezel, dimension d
requires a minimum of 6 mm. When the padlock is installed from the
front of the button, dimension d requires a minimum of 15 mm.
Terminal Cover
IP20 Fingersafe
Terminal Cover
Ring Wrench
90
ø38
Ring Wrench
49.5
52
20.5
23.777
1.0
1.5
ø60
ø30