ø16 Switches and Pilot Lights Suitable for a wide variety of office and factory aplications. A6 Series Features IDEC’s original mechanism for snap-action switching. The LED lamp contains a current-limiting resistor and a diode for protection against reverse connection. Degree of protection: IP40 and IP65 (IEC 60529) • See website for details on approvals and standards.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Light duty in short 22mm body length.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Illuminated Pushbuttons Package Quantity: 1 Shape Operating Voltage Operation Round AL6M APEM 5V DC Momentary Switches & Pilot Lights 24V AC/DC Control Boxes Emergency Stop Switches Enabling Switches 5V DC Maintained Safety Products Explosion Proof Terminal Blocks Relays & Sockets 12V AC/DC 12V AC/DC 24V AC/DC Square AL6Q Circuit Protectors 5V DC Momentary 12V AC/DC Power Supplies 24V AC/DC LED Illumination Cont
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Pilot Lights Package Quantity: 1 Shape Part No.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Dimensions (Illuminated Pushbuttons & Pilot Lights) 2.5 Panel Thickness 0.5 to 6 Rectangular Rectangular w/3-way barrier (TOP) Rubber Gasket Anti-rotation Ring Terminal Width 2.8×0.5t 3 All dimensions in mm. Square (TOP) Round 18 5 Locking Ring 5 APEM Switches & Pilot Lights 6 Pilot Light Control Boxes 1 6 8 0.6 22 24 9 9 Illuminated Pushbutton 1.0 1.2 Emergency Stop Switches Enabling Switches 2.6 2-R0.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Pushbuttons Package Quantity: 1 Shape Button Style Round AB6M Operation Momentary Button Maintained Momentary Lens Maintained Square AB6Q Momentary Button Maintained Momentary Lens Maintained Rectangular AB6H Momentary Button Maintained Momentary Lens Maintained Rectangular w/three-sided barrier AB6G Momentary Button Maintained Momentary Lens Maintained Contact Part No.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Dimensions (Pushbuttons) Pushbutton All dimensions in mm. Rubber Gasket Anti-rotation Ring Terminal Width 2.8×0.5t 2.5 3 Square (TOP) Round 5 APEM 1 Switches & Pilot Lights 8 22 0.6 9 24 18 5.7 9 Control Boxes 1.0 1.2 Emergency Stop Switches Enabling Switches 2.6 2-R0.6 Safety Products * Solder/Tab Terminal Explosion Proof Terminal Blocks • See B-164 for lens and button maintenance parts.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Selector Switches How to change the operator position Operator position can be changed by IDEC’s original bezel rotating and locking system. The bezel can be locked at every 45° and bezel rotation is prevented while mounting on a panel. Example: 3-position R (C) (C) R (C) L L (C) R L L Pull out the bezel to release the lock. Rotate the bezel, and push it in at 45° intervals to lock the bezel.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Dimensions (Selector Switches) All dimensions in mm. Dimensions All dimensions in mm. Terminal Width 2.8×0.5t 2.5 3 Rubber Gasket Anti-rotation Ring Panel Thickness 0.5 to 6 Rectangular (TOP) Locking Ring Square (TOP) Round (TOP) 8 ø1 5 Emergency Stop Switches Enabling Switches Terminal Arrangement (bottom view) (Selector Switch) Safety Products Explosion Proof 8 1 8 22 15.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Key Selector Switches Package Quantity: 1 Shape Position Key Retained at ● Operation Round AS6M A B Maintained 90° 2-position L R L R L C Spring return from right R L A B L C L D L E L G L H L C C C Contact IP40 IP65 AS6M-2KT1A AS6M-2KT1PA DPDT AS6M-2KT2A AS6M-2KT2PA SPDT AS6M-2KT1B AS6M-2KT1PB DPDT AS6M-2KT2B AS6M-2KT2PB SPDT AS6M-2KT1C AS6M-2KT1PC Switches & Pilot Lights DPDT AS6M
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Key Selector Switches Package Quantity: 1 Shape Position Key Retained at ● Operation Square AS6Q A APEM B Maintained 90° 2-position Switches & Pilot Lights L R L R L R L R C Control Boxes Emergency Stop Switches Enabling Switches Spring return from right B Safety Products Explosion Proof Terminal Blocks A L B L C L D L Relays & Sockets Maintained Circuit Protectors L E Power Supplies LED Illumi
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Key Selector Switches Package Quantity: 1 Shape Position Key Retained at ● Operation Rectangular AS6H A B Maintained 90° 2-position L R L R L R L R C Spring return from right B Maintained 45° 3-position Spring return from right A L B L C L D L E L G L H L B L D L Spring return from left D Spring return two-way C C C C C L H L D L C C C C C Contact IP40 IP65 AS6H-2KT1A SP
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Dimensions All dimensions in mm. 2.5 Right Contact 1.0 2.6 1.2 3 TOP Left Contact Terminal Width 2.8×0.5t APEM 2.5 Control Boxes 5 Emergency Stop Switches Enabling Switches 5 Switches & Pilot Lights 3 Rubber Gasket Anti-rotation Ring Locking Ring Panel Thickness 0.5 to 6 Round (TOP) Square (TOP) 2-R0.
Accessories Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights All dimensions in mm. Shape Material Locking Ring Wrench Metal (nickel-plated brass) ø18 60 Part No. MT-001 Ordering No. MT-001 Package Quantity 1 Remarks • Used to tighten the locking ring when installing A6 control units into a panel. APEM Lamp Holder Tool ø9 Rubber ø10 OR-77 OR-77 1 • Used to install and remove the LED lamps.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Dimensions All dimensions in mm. Switch Guard [Remains open] For round/square units (Degree of protection: IP40) LB9Z-K2 Rubber Gasket 18 Rubber Gasket 32.7 24 23.5 11 13 32.9 11 0 18 ° 0° 13 11 0 18 ° 0° Emergency Stop Switches Enabling Switches 23.5 Control Boxes Panel Thickness 0.5 to 5.6 32.7 11 Switches & Pilot Lights Panel Thickness 0.5 to 5.6 32.
Dimensions Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights All dimensions in mm. Socket 2.5 33.5 TOP 8-1.6 Terminal 1.5×0.3t 33.5 3 +0.3 0 Holes 2.5 3 16.2 6 7.5 5 5 5 5 2.4 (TOP) 6 16.2 Solder Terminal (AL-C6) 3.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Grip Switch Housing Grip Style Enabling Switch Housing APEM Switches & Pilot Lights The following switches can be installed on the grip style enabling switch housing to be used as hand-held switches. • AB6M pushbuttons (IP65, except for AB6M-V) • AS6M selector switches (IP65) • AS6M key selector switches (IP65) Note: Illuminated pushbuttons and pilot lights cannot be used. When using HE9ZGSH51, be sure to used IP65 switches.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Maintenance Parts Shape Lens Specification Round Square Polyarylate Rectangular Button Ordering No. AL6M-L➁ AL6M-L➁PN05 AL6Q-L➁ AL6Q-L➁PN05 AL6H-L➁ AL6H-L➁PN05 Package Quantity Remarks Specify a color code in place of ➁ in the Part No. A (amber), C (clear), G (green) R (red), S (blue), Y (yellow) • Use a C (clear) lens for JW (pure white) illumination.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights LED Lamps Current Draw Operating Voltage Dimensions 5V DC ±5% 6V DC ±5% APEM Switches & Pilot Lights 13.3 12 4 Control Boxes DC — 8 mA 7 mA (G, S, JW) 8 mA (A, R, W) 5 mA (G, S, JW) 6 mA (A, R, W) Part No. LATD-5➁PN10 LATD-6➁ LATD-6➁ 9 mA 8 mA LATD-1➁ 24V AC/DC ±10% 9 mA 8 mA LATD-2➁ Base 1 LATD-5➁ LATD-5➁ 12V AC/DC ±10% Package Quantity ➁ Illumination Color Code Ordering No.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Safety Precautions • Turn off the power to A series control units before starting installation, removal, wiring, maintenance, and inspection of the control units. Failure to turn power off may cause electrical shocks or fire hazard. • To avoid a burn on your hand, use the lamp holder tool when replacing lamps. • For wiring, use wires of a proper size to meet the voltage and current requirements.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights Operating Instructions APEM All dimensions in mm. Opening/closing the Switch Guard Selector Switches with Key (LB9Z-K2, LB9Z-K3P) Observe the following instructions to prevent malfunction or damage. • Insert the key to the bottom of the key hole. • Do not remove the key from any key retained position. • Besides the standard key (key number 0H), six other key numbers are available.
Switches & Pilot Lights ø16 A6 Series Miniature Switches and Pilot Lights APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks Relays & Sockets Circuit Protectors Power Supplies LED Illumination Controllers Operator Interfaces Sensors AUTO-ID Flush Silhouette ø16 ø22 ø30 Miniature Pilot Lights LB A6 Benelux B: (+32) 27 25 05 00 - sales@apem.be NL: (+31) (70) 799 91 51 - sales@apem.
Switches & Pilot Lights Flush Bezel (Accessories) LB/A6 Series Flush silhouette bezels for LB/ A6 series switches and pilot lights. APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches • Accessories for LB (standard bezel) / A6 series. • Bezel Size Round: ø24 mm (Panel Cut-out: ø20.2 mm) Square: 24 mm (Panel Cut-out: 20.2 mm) Rectangular: 24×30 mm (Panel Cut-out: 20.2×26.
Shape Specification Package Quantity Part No. Switches & Pilot Lights Flush Bezel (Accessories) LB/A6 Series Remarks Round Square Plug: Polyamide (black) Gasket: Nitril rubber Mounting bracket: Stainless steel Mounting Hole Plug LA9Z-BS6 1 LA9Z-BS7 1 APEM • Degree of protection: IP65 • Panel thickness: 0.
Switches & Pilot Lights Flush Bezel (Accessories) LB/A6 Series Dimensions All dimensions in mm. Flush Bezel with Switch Guard A6 Series [Mounting Hole Layout] 47.5 min. 26.4 Panel Thickness 0.5 to 5 33.1 APEM Switches & Pilot Lights 30 min. 24 Control Boxes Emergency Stop Switches Enabling Switches Mounting holes are the same size as rectangular flush bezels. 1 5.4 29 8 30 Safety Products Relays & Sockets Circuit Protectors Panel Thickness 0.
Switches & Pilot Lights Flush Bezel (Accessories) LB/A6 Series Safety Precautions • Turn off the power to the control units before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or fire hazard. • To avoid burning your hand, use the lamp holder tool when replacing lamps. • For wiring, use wires of a proper size to meet voltage and current requirements and solder correctly. Improper soldering may cause overheating and fire hazard.
