Instruction Manual

DS2 series Instruction manual
26
Remote configuration from host user interface
: synoptic table showing the output variation with
respect to the detection analysis mode configuration
Outputs
Function Mode
Analog Switching Serial
Normal - Presence detection -
Get TEACH-IN
from DS2
Conditional presence
detection from
TEACH-IN
TEACH-
IN
Set TEACH-IN from
User Interface
-
Conditional presence
detection from
TEACH-IN
-
Absolute Positioning
Detection
Positional detection of
TEACH-IN ref. object
TEACH-
IN Mode
Relative Positioning
Detection
-
Detection of TEACH-
IN reference object
-
Normally Opened -
Current on switching
device during
detection
-
Switching
Output Mode
Normally Closed -
No current on
switching device
during detection
-
No Delay - - -
Switching
Output Delay
0 < T
DELAY
< 200ms -
Restore from
detection delay =
T
DELAY
-
Enable
It holds
analogue and
serial output
to the higher
detected
value during
enable of
“output
HOLD” input
(pin5 RX
connector on
24Vdc)
-
It holds
analogue and
serial output
to the higher
detected
value during
enable of
“output
HOLD” input
(pin5 RX
connector on
24Vdc)
Output Hold
Disable Normal operation