Instruction Manual

34
Maintain and inspect the Touch periodically to ensure the best performance. Do not
disassemble, repair, or modify the Touch during inspection.
10 Maintenance and Inspection
Display
Wipe any stain of the display using a soft cloth slightly dampened with
neutral detergent or alcoholic solvent.
Do not use solvents such as thinner, ammonia, strong acid, and strong
alkaline.
Terminals, Connectors
Check the terminals and connectors to make sure of no loose screws,
incomplete insertion, or disconnected lines.
Mounting Clips
Make sure that all mounting clips and screws are tightened sufficiently.
If the mounting clips are loose, tighten the screw to the recommended
tightening torque.
Backlight
The Touch backlight cannot be replaced by the customer.
When the backlight needs to be replaced, contact IDEC.
Touch Panel
A gap may be caused in the operation accuracy of the touch panel by
the secular distortion, etc.
Adjust the touch panel according to the following procedure when
there is a gap in the operation of the touch panel.