Datasheet

www.apem-idec.eu
D-072
HE3B ø16mm Rectangular Three-position Enabling Switches
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Enabling Switches
HE1B
HE2B
HE3B
HE5B
HE6B
HE2G
HE1G-L
Actuator w/
Plastic Holder
HE1B
HE2B
HE3B
HE5B
HE6B
HE2G
HE1G-L
Actuator w/
Plastic Holder
Rectangular operator part with ø16 mm mounting for easy installation.
2-contact 3-position enabling switches ideal for installing in small teach pendants.
• See website for details on approvals and standards.
HE3B
Shape Style
Contact
Conguration
Part No. Ordering No.
Package
Quantity
Without Rubber Boot
2 contacts
(3-position
switch)
HE3B-M2
HE3B-M2
1
HE3B-M2PN10
10
With Rubber Boot
Rubber Boot
Material:
Silicon Rubber
Color:
Y: yellow, B: black
HE3B-M2P∗
HE3B-M2P∗
1
HE3B-M2P∗PN10
10
Rubber Boot
Material:
NBR/PVC Polyblend
Color: gray
HE3B-M2PN1
HE3B-M2PN1
1
HE3B-M2PN1PN10
10
Note: Specify a rubber boot color code in place of ∗ in the Ordering No.
Contact Ratings
Rated Insulation Voltage (Ui) 125V
Rated Thermal Current (Ith) 3A
Rated Voltage (Ue) 30V 125V
Rated Current
(Ie)
AC
Resistive Load (AC-12) — 1A
Inductive Load (AC-15) — 0.7A
DC
Resistive Load (DC-12) 1A 0.2A
Inductive Load (DC-13) 0.7A 0.1A
Contact Conguration (3-position switch) 2 contacts
Minimum applicable load (reference value): 5V AC/DC, 1 mA
(Applicable range is subject to the operating conditions and load.)
Specifications
Applicable Standards
IEC/EN60947-5-8 (TÜV approval), IEC/EN60947-5-1, JIS C8201-5-1
UL508 (UL recognized), CSA C22.2 No. 14 (c-UL recognized),
GB14048.5 (CCC approval)
Applicable Standards
for Use
ISO12100-1, -2/EN12100-1, -2, IEC60204-1/EN60204-1
ISO11161/prEN11161, ISO10218/EN775, ANSI/RIA R15.06,
ANSI B11.19, ISO13849-1 / EN ISO13849-1
Operating Temperature
–25 to +60°C (no freezing) (without rubber boot, with silicon rubber boot)
–10 to +60°C (no freezing) (with NBR/PVC polyblend rubber boot)
Relative Humidity 45 to 85% (no condensation)
Storage Temperature –40 to +80°C (no freezing)
Pollution Degree
2 (inside panel, terminal side)
3 (outside panel, operator side)
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance
Between live and dead metal parts: 100 MΩ minimum (500V
DC megger)
Between terminals of different poles: 100 MΩ minimum (500V
DC megger)
Impulse Withstand
Voltage
1.5 kV
Operating Frequency 1,200 operations per hour
Mechanical Durability
Position 1 → 2 → 1: 1,000,000 operations minimum
Position 1 → 2 → 3 → 1: 100,000 operations minimum
Electrical Durability 100,000 operations minimum
Shock Resistance
Operating extremes: 150 m/s
2
Damage limits: 500 m/s
2
Vibration Resistance
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits: 16.7 Hz, amplitude 1.5 mm
Terminal Style Solder terminal
Applicable Wire 1 cable, 0.5 mm
2
maximum
Terminal Soldering
Heat Resistance
310 to 350°C, 3 seconds maximum
Terminal Tensile Strength 20N minimum
Locking Ring Recommended
Tightening Torque
0.68 to 0.88 N·m
Degree of Protection
IP40 (without rubber boot)
IP65 (with rubber boot) (IEC 60529)
Conditional Short-circuit
Current
50A (250V) (Use 250V/10A fast-blow fuse
for short-circuit protection.)
Operator Strength 500N minimum (pressing the entire operator surface)
Weight (approx.)
14g (without rubber boot)
18g (with rubber boot)