Datasheet

www.apem-idec.eu
D-070
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Enabling Switches
HE1B
HE2B
HE3B
HE5B
HE6B
HE2G
HE1G-L
Actuator w/
Plastic Holder
HE2B Double Three-position Enabling Switches
Terminal Arrangement (Bottom View)
IDEC Logo Side
HE2B-M200
IDEC Logo Side
HE2B-M211
IDEC Logo Side
HE2B-M222
• 3-position switch (note): 2 contacts, terminal nos. between NO1 – C1, NO2 – C2
• Button return monitor switch: 0 to 2 contacts, terminal nos. between 11 – 12, 21 – 22
• Button depress monitor switch: 0 to 2 contacts, terminal nos. between 31 – 32, 41 – 42
Note: Use NO and C terminals for OFF → ON → OFF 3-position switch (NC terminal is not used).
Dimensions
M3 nut hole
10
16
87
78
66.5
14.27
5.5
13.5
5
69
68
69
7
14.2
11.5
19
90
14.8
6.5
5
Without Rubber Boot With Rubber Boot
• M3 nuts are supplied with the HE2B enabling switch. • M3 nuts are installed in the rubber boot.
Mounting Hole Layout
Mounting Panel Thickness: 6 max.
Mounting Screws
0
+0.2
12.2
±0.2
78
2-ø3.2
±0.2
70
All dimensions in mm.
• Mounting screw: Two M3 screws
• Length of mounting screw: Mounting panel thickness + 4 to 5 mm
Accessories
Replacement Rubber Boot
Material Color Part No. Ordering No. Package Quantity
Silicon Rubber
Y: yellow
B: black
HE9Z-D2∗ HE9Z-D2∗PN10
10
NBR/PVC Polyblend Gray HE9Z-D2N1 HE9Z-D2N1PN10
Note: Specify a rubber boot color code in place of ∗ in the Ordering No.
• Can be installed on HE2B-M200/M211/M222 (without rubber boot)