Datasheet

www.apem-idec.eu
D-075
HE5B ø16mm Round Three-position Enabling Switches
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Enabling Switches
HE1B
HE2B
HE3B
HE5B
HE6B
HE2G
HE1G-L
Actuator w/
Plastic Holder
Round-shaped operator for ø16 mm mounting hole.
3-position enabling switch with two contacts, ideal for installing in small teaching pendants.
• See website for details on approvals and standards.
HE5B
Shape Style
Contact
Conguration
Part No. Ordering No.
Package
Quantity
With Rubber Boot
Silicon
Rubber
Y: yellow
B: black
2 contacts
(3-position
switch)
HE5B-M2P∗
HE5B-M2P∗
1
HE5B-M2P∗PN10
10
NBR/PVC
HE5B-M2PN1
HE5B-M2PN1 1
HE5B-M2PN1PN10 10
• Specify a rubber boot color code in place of ∗ in the Ordering No.
Contact Ratings
Rated Insulation Voltage (Ui)
125V
Rated Thermal Current (Ith)
3A
Rated Voltage (Ue)
30V 125V
Rated Current (Ie)
AC
Resistive Load (AC-12)
– 0.5A
Inductive Load (AC-15)
– 0.3A
DC
Resistive Load (DC-12)
1A –
Inductive Load (DC-13)
0.7A –
Contact Conguration (3-position switch)
2 contacts
Minimum applicable load (reference): 3V AC/DC, 1mA
(Applicable operation area depends on the operating conditions and load.)
Specifications
Applicable Standards
IEC/EN60947-5-8 (TÜV approval), IEC/EN60947-5-1
UL508 (UL recognized), CSA C22.2 No. 14 (c-UL recognized),
GB14048.5 (CCC approval)
Applicable Standards
for Use
ISO12100-1, -2/EN12100-1, -2, IEC60204-1/EN60204-1
ISO11161/prEN11161, ISO10218/EN775, ANSI/RIA
R15.06, ANSI B11.19
Operating
Temperature
Silicon rubber boot: –25 to 60°C (no freezing)
NBR/PVC Polyblend rubber boot: –10 to 60°C (no freezing)
Relative Humidity 45 to 85% (no condensation)
Storage Temperature –40 to +80°C (no freezing)
Pollution Degree
2 (inside panel, terminal side)
3 (outside panel, operator side)
Contact Resistance 50 mΩ maximum (initial value)
Insulation Resistance
Between live and dead metal parts: 100 MΩminimum
(500V DC megger)
Between terminals of different pole: 100 MΩminimum
(500V DC megger)
Impulse Withstand
Voltage
1.5 kV
Operating Frequency 1,200 operations per hour
Mechanical Durability
Position 1 → 2 → 1: 1,000,000 operations minimum
Position 1 → 2 → 3 → 1: 100,000 operations minimum
Electrical Durability 100,000 operations minimum
Shock Resistance
Operating extremes: 150 m/s
2
Damage limits: 500 m/s
2
Vibration Resistance
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits: 5 to 55 Hz, amplitude 1.5 mm
Terminal Style Solder terminal
Applicable Wire 0.5 mm
2
maximum per line
Terminal Soldering
Heat Resistance
310 to 350°C, 3 seconds maximum
Terminal Tensile
Strength
20 N minimum
Locking Ring
Recommended
Tightening Torque
0.29 to 0.49 N·m
Degree of Protection IP65 (IEC 60529)
Conditional Short-
circuit Current
50A (125V) (Use 250V/10A fast-blow fuse
for short circuit protection.)
Operator Strength
250N minimum (when pressing the entire operator surface)
Weight (approx.) 8g (without rubber boot), 9g (with rubber boot)